Re: [GMCnet] Fogged windshield? [message #124632] |
Wed, 04 May 2011 23:40 |
sgltrac
Messages: 2797 Registered: April 2011
Karma: 1
|
Senior Member |
|
|
Windshield glue absorbs moisture and adding water(mist) to a freshly set window bead will speed the cure. I would think a sealant on the edge of the glass (other than windshield adhesive) might be more effective to stop transmission of moisture.
Just what I've heard
Sully
77royale
------Original Message------
From: Ken Burton
Sender: gmclist-bounces@temp.gmcnet.org
To: gmclist@temp.gmcnet.org
ReplyTo: gmclist@temp.gmcnet.org
Subject: Re: [GMCnet] Fogged windshield?
Sent: May 4, 2011 9:27 PM
That is what my windshield guy does only he uses the normal windshield sealer rather than silicone. He says never use silicone on any part of a car. Also if you use silicone it will leave steaks every time it rains and water runs over the silicone.
--
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Sent from my Verizon Wireless BlackBerry
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Sully
77 Royale basket case.
Future motorhome land speed record holder(bucket list)
Seattle, Wa.
|
|
|
Re: [GMCnet] Fogged windshield? [message #124638 is a reply to message #124632] |
Thu, 05 May 2011 03:32 |
Ken Burton
Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
I do not think we are talking about the same stuff. This is more of a rubber product. He keeps the tubes in a heater and applies the stuff hot. It never completely hardens. I have a tube of it in my hanger. I microwaved the tube prior to using it since I do not have normal tube heater.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|