GMCforum: GMCnet » TH425 Lower First Gear Ratio

Home » Public Forums » GMCnet » TH425 Lower First Gear Ratio (TH425 Transmission Rebuild)

Show: Today's Messages :: Polls :: Message Navigator

TH425 Lower First Gear Ratio [message #124579]

Wed, 04 May 2011 12:59

bwevers

Messages: 597
Registered: October 2010
Location: San Jose

Karma:

Senior Member

Hello All,
I was reading about the similarities between the TH400 and the TH425 and saw that there is a lower ratio gear set available. I wondered if anyone had ever tried using the 2.75 or 2.97 instead of the standard 2.48. This would have the same effect as installing a 3.50 final drive (in first gear) but would have the same highway gearing. Manny has probably tried this already.

Regards,
Bill Wevers

Bill Wevers GMC49ers, GMC Western States 1975 Glenbrook - Manny Powerdrive, OneTon 455 F Block, G heads San Jose

Report message to a moderator

[Message index]

		TH425 Lower First Gear Ratio By: bwevers on Wed, 04 May 2011 12:59
		Re: [GMCnet] TH425 Lower First Gear Ratio By: mannystrans on Wed, 04 May 2011 15:53
		Re: [GMCnet] TH425 Lower First Gear Ratio By: bwevers on Wed, 04 May 2011 17:19

Previous Topic:	Re: [GMCnet] Fogged windshield?
Next Topic:	[GMCnet] Replacment Onan...

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Sep 26 20:25:21 CDT 2024

Total time taken to generate the page: 0.00634 seconds