[GMCnet] CHEVY ONE-TON FRONT END KIT [message #124572] |
Wed, 04 May 2011 12:22 |
mannystrans
Messages: 209 Registered: June 2006
Karma: 1
|
Senior Member |
|
|
CHEVY ONE-TON FRONT END KIT
This is the Chevy One-Ton front end that Bill Hubler created.
I decided to streamline the kit with new parts to make it more
affordable by buying the parts at quantity prices.
We have over 100 knuckles and more are arriving almost everyday.
The drawback is the lower control arms that I don't have enough in stock. So
I have to charge a ($300) core charge so you will return your old arms..
So once the kit is installed and the arms are returned, you'll get
your core charge back.
The kit is $1570.00 each, for the first 50 sets.
The kit includes everything you will need, but, does not include the
80mm calipers, pads, or the brake hoses. These can be supplied upon
request.
I also have some tie rod ends if needed.
--
Manny Trovao
mannystrans@gmail.com
Manny's Trans / Power Drive
San Jose, California
408-937-1583
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] CHEVY ONE-TON FRONT END KIT [message #124575 is a reply to message #124572] |
Wed, 04 May 2011 12:24 |
Mr ERFisher
Messages: 7117 Registered: August 2005
Karma: 2
|
Senior Member |
|
|
cool here we go
gene
On Wed, May 4, 2011 at 10:22 AM, Manny Trovao <mannystrans@gmail.com> wrote:
> CHEVY ONE-TON FRONT END KIT
>
>
>
> This is the Chevy One-Ton front end that Bill Hubler created.
>
>
>
> I decided to streamline the kit with new parts to make it more
> affordable by buying the parts at quantity prices.
>
>
>
> We have over 100 knuckles and more are arriving almost everyday.
> The drawback is the lower control arms that I don't have enough in stock.
> So
> I have to charge a ($300) core charge so you will return your old arms..
>
>
>
> So once the kit is installed and the arms are returned, you'll get
> your core charge back.
>
>
>
> The kit is $1570.00 each, for the first 50 sets.
>
>
>
> The kit includes everything you will need, but, does not include the
> 80mm calipers, pads, or the brake hoses. These can be supplied upon
> request.
> I also have some tie rod ends if needed.
>
>
>
>
> --
> Manny Trovao
> mannystrans@gmail.com
> Manny's Trans / Power Drive
> San Jose, California
> 408-937-1583
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] CHEVY ONE-TON FRONT END KIT [message #124585 is a reply to message #124572] |
Wed, 04 May 2011 13:42 |
Dennis S
Messages: 3046 Registered: November 2005
Karma: 2
|
Senior Member |
|
|
mannystrans wrote on Wed, 04 May 2011 12:22 | CHEVY ONE-TON FRONT END KIT
This is the Chevy One-Ton front end that Bill Hubler created.
I decided to streamline the kit with new parts to make it more
affordable by buying the parts at quantity prices.
We have over 100 knuckles and more are arriving almost everyday.
The drawback is the lower control arms that I don't have enough in stock. So
I have to charge a ($300) core charge so you will return your old arms..
So once the kit is installed and the arms are returned, you'll get
your core charge back.
The kit is $1570.00 each, for the first 50 sets.
The kit includes everything you will need, but, does not include the
80mm calipers, pads, or the brake hoses. These can be supplied upon
request.
I also have some tie rod ends if needed.
--
Manny Trovao
mannystrans@gmail.com
Manny's Trans / Power Drive
San Jose, California
408-937-1583
|
Manny,
I have not considered changing these components on my coach -- but you have my attention with this kit -- so maybe on my other coach, a 76 that was to be a future project.
Thank you very much for the work you have put into this -- great support of our GMC's.
Regards,
Dennis
Dennis S
73 Painted Desert 230
Memphis TN Metro
|
|
|
|
|
|
|
|
|
Re: [GMCnet] CHEVY ONE-TON FRONT END KIT [message #124738 is a reply to message #124593] |
Thu, 05 May 2011 18:07 |
|
mike miller
Messages: 3576 Registered: February 2004 Location: Hillsboro, Oregon
Karma: 0
|
Senior Member |
|
|
Harry wrote on Wed, 04 May 2011 12:28 | Do we still have to use those ugly spacers?
|
The only time you see the spacer is when the wheel is off.
I like my coach with the wheels ON.
Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo'
http://m000035.blogspot.com
|
|
|
|
Re: [GMCnet] CHEVY ONE-TON FRONT END KIT [message #124782 is a reply to message #124780] |
Thu, 05 May 2011 23:34 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Manny,
You are welcome.
On Thu, May 5, 2011 at 9:28 PM, Manny Trovao <mannystrans@gmail.com> wrote:
> The response has been overwhelming.
> As of this morning I have 22 orders for the kit.
> I was worried because of lack of control arms on hand but Jim Kanomata
> let me have a dozen.
> Thanks everyone, you too Jim
>
>
> --
> Manny Trovao
> mannystrans@gmail.com
> Manny's Trans / Power Drive
> San Jose, California
> 408-937-1583
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|