GMCforum: GMCnet » air line rupture

Home » Public Forums » GMCnet » air line rupture - ideas?

Show: Today's Messages :: Polls :: Message Navigator

air line rupture - ideas? [message #124144]

Sun, 01 May 2011 20:32

Rickmo

Messages: 105
Registered: January 2011
Location: Gladwin, Michigan

Karma:

Senior Member

The plastic tubing that goes from my compressor to the tank keeps blowing. The rupture occurs when just above the fitting where it attaches to the air compressor. My theory is that the tubing gets weak when it gets hot, then ruptures. The fitting does get awfully hot. Incidently the compressor shuts down when the tank has 98 pound,s of pressure so I know it is not blowing due to over pressure. Any thoughts?

Rick Seebeck Gladwin Michigan 1973 Canyon Lands

Report message to a moderator

[Message index]

		air line rupture - ideas? By: Rickmo on Sun, 01 May 2011 20:32
		Re: air line rupture - ideas? By: idrob on Sun, 01 May 2011 20:41
		Re: air line rupture - ideas? By: Larry C on Sun, 01 May 2011 20:56
		Re: air line rupture - ideas? By: roy1 on Sun, 01 May 2011 20:57

Previous Topic:	[GMCnet] Tongue weight
Next Topic:	Electric water heater not allowed.

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Nov 20 10:31:46 CST 2024

Total time taken to generate the page: 0.00925 seconds