GMCforum: GMCnet » Gap at back wheels

Home » Public Forums » GMCnet » Gap at back wheels

Show: Today's Messages :: Polls :: Message Navigator

Gap at back wheels [message #122903]

Sat, 23 April 2011 13:12

tgeiger

Messages: 518
Registered: February 2006
Location: kansas city

Karma:

Senior Member

I was talking to my mechanic about doing the isolation pads. He has been doing the brake lines and has both pairs of wheels up on jack stands as he was doing the lines. He hasn't started on the iso pads yet, but said he is seeing 1 1/2" gap between the plywood floor and the rail beam over the tag wheels. He was wondering if this was normal. I asked him if it was possibly because he has it up on the jack stands. Anyhow I told him I'd ask on this forum. Anyone have any ideas on this?

Thanks,
Tom

Tom Geiger 76 Eleganza II KCMO

Report message to a moderator

[Message index]

		Gap at back wheels By: tgeiger on Sat, 23 April 2011 13:12
		Re: Gap at back wheels By: Dennis S on Sat, 23 April 2011 13:33
		Re: Gap at back wheels By: Ken Burton on Sat, 23 April 2011 15:23
		Re: Gap at back wheels By: mike miller on Sat, 23 April 2011 19:12
		Re: Gap at back wheels By: WD0AFQ on Sat, 23 April 2011 19:56
		Re: Gap at back wheels By: midlf on Sun, 24 April 2011 07:30
		Re: [GMCnet] Gap at back wheels By: Mr ERFisher on Sun, 24 April 2011 08:46
		Re: [GMCnet] Gap at back wheels By: midlf on Sun, 24 April 2011 11:25
		Re: [GMCnet] Gap at back wheels By: emerystora on Sat, 23 April 2011 21:02
		Re: Gap at back wheels By: tgeiger on Sat, 23 April 2011 22:00
		Re: Gap at back wheels By: Ken Burton on Sat, 23 April 2011 23:43
		Re: Gap at back wheels By: tgeiger on Sun, 24 April 2011 09:15
		Re: Gap at back wheels By: Ken Burton on Sun, 24 April 2011 09:33

Previous Topic:	[GMCnet] Joys of GMC Ownership
Next Topic:	Lower Radiator Hose

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Nov 16 02:20:18 CST 2024

Total time taken to generate the page: 0.00701 seconds