GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] LPG Tank Refinishing
[GMCnet] LPG Tank Refinishing [message #122722] Fri, 22 April 2011 08:39 Go to previous message
USAussie is currently offline  USAussie   United States
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma:
Senior Member
G'day,

Yesterday I finished up repainting the LPG tank out of Double Trouble and
cleaning up the galvanized compartment it sits in.

I used a soda blaster I got from Harbor Freight to remove the old paint and
loose rust; it worked well.

The instructions that came with the soda blaster noted that it could
generate sparks so to be safe; I purged the tank with shop air for about 5
minutes. I noted the smell of Mercaptan decreased greatly after the purge so
I figured it was safe to proceed and since I am sitting here typing this
obviously I was correct. ;-)

When I removed the gage I noted that the O-ring around the LPG gage sealing
boss was pretty hard.

The o-ring has a square cross section but all I could find were round cross
section o-rings at the local True Value hardware store so I got several
different sizes. They were the typical black material but the box did not
say what the material was.

I put the one with the smallest cross section around the gage float sealing
boss and it looked pretty close to the original o-ring so I installed it.

After applying a bit of anti-seize to the screws I tightened them lightly
until they made contact with the gage face.

From there I screwed them down slowly and sequentially so that it would pull
the gage in straight.

Questions:

1) Is the o-ring a supposed to be a special material?

2) Does anyone know where I can get the correct square cross section o-ring
for the LPG tank gage boss?

John Sharpe mentioned to me that I need to evacuate the cylinder to get the
air out so I did a Google search and found the article below.

http://tinyurl.com/cd36x

http://home.earthlink.net/~derekgore/rvroadiervfulltimingwhatisitreallylike/
id45.html

Regards,
Rob M.
USAussie - Downunder
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Regards, Rob M. (USAussie) The Pedantic Mechanic Sydney, Australia '75 Avion - AUS - The Blue Streak TZE365V100428 '75 Avion - USA - Double Trouble TZE365V100426
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Broken Exhaust Manifold Bolts
Next Topic: [GMCnet] How big a towtruck?
Goto Forum:
  


Current Time: Sun Nov 17 09:33:06 CST 2024

Total time taken to generate the page: 0.01908 seconds