GMCforum: GMCnet » [GMCnet] jrv monitor

Home » Public Forums » GMCnet » [GMCnet] jrv monitor

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] jrv monitor [message #122298]

Tue, 19 April 2011 00:04

john arbuckle

Messages: 122
Registered: March 2010

Karma: 0

Senior Member

Hey everyone its been awhile since I've chatted with you all my
restoration is going well. I have completed the rear perm bed and have
moved on to the electrical. I have purchased A JRV tank monitor
system. I replaced both my dark and fresh water tanks. Unfortunately
already mounted the dark tank and need to drill 4 3/8 holes for the
sensors. It is difficult with the limited space underneath that thing.
Does anyone have any ideas? It would be greatly appreciated. Hope
everyone is well and traveling safe.

John Arbuckle
1976 Palm Beach
Tucson AZ
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] jrv monitor [message #122303 is a reply to message #122298]

Tue, 19 April 2011 01:37

jimk

Messages: 6734
Registered: July 2006
Location: Belmont, CA

Karma: 9

Senior Member

The holes do not need to be arranged in a straight line.

On Mon, Apr 18, 2011 at 10:04 PM, john arbuckle <jarbuckle1209@gmail.com> wrote:
> Hey everyone its been awhile since I've chatted with you all my
> restoration is going well. I have completed the rear perm bed and have
> moved on to the electrical. I have purchased A JRV tank monitor
> system. I replaced both my dark and fresh water tanks. Unfortunately
> already mounted the dark tank and need to drill 4 3/8 holes for the
> sensors. It is difficult with the limited space underneath that thing.
> Does anyone have any ideas? It would be greatly appreciated. Hope
> everyone is well and traveling safe.
>
> John Arbuckle
> 1976 Palm Beach
> Tucson AZ
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>

--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502

Report message to a moderator

Re: [GMCnet] jrv monitor [message #122306 is a reply to message #122298]

Tue, 19 April 2011 05:18

Mr ERFisher

Messages: 7117
Registered: August 2005

Karma: 2

Senior Member

If you do not hook to city water, you do not need a black tank monitor

when the fresh water is gone ---- dump----

also might keep you from getting flooded when you get a leak
http://goo.gl/RxcQj

gene

On Mon, Apr 18, 2011 at 10:04 PM, john arbuckle <jarbuckle1209@gmail.com>wrote:

> Hey everyone its been awhile since I've chatted with you all my
> restoration is going well. I have completed the rear perm bed and have
> moved on to the electrical. I have purchased A JRV tank monitor
> system. I replaced both my dark and fresh water tanks. Unfortunately
> already mounted the dark tank and need to drill 4 3/8 holes for the
> sensors. It is difficult with the limited space underneath that thing.
> Does anyone have any ideas? It would be greatly appreciated. Hope
> everyone is well and traveling safe.
>
> John Arbuckle
> 1976 Palm Beach
> Tucson AZ
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>

--
Gene Fisher -- 74-23,77PB/ore/ca
�Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] jrv monitor [message #122316 is a reply to message #122298]

Tue, 19 April 2011 08:58

armandminnie

Messages: 864
Registered: May 2009
Location: Marana, AZ

Karma: 2

Senior Member

I am sorry to say that the probes in the black tank are not worth the time to install. They do not work. "Stuff" apparently just hangs on them and gives false readings and no amount of cleaning fixes it. I even took the probe screws out rounded off the ends and polished them hoping to stop the false readings but it did not help. There are probes available that claim to work because they have sort of a 'roof' over them but they want $30-$40 for them and by the time I found them I had already switched over to the "when the water tank is empty the holding tank is full" method which works fine.

Armand Minnie
Marana, AZ
'76 Eleganza II TZE166V103202
visit my gmc blog
click here to visit gmcws.org

Report message to a moderator

Re: [GMCnet] jrv monitor [message #122317 is a reply to message #122316]

Tue, 19 April 2011 09:15

USAussie

Messages: 15912
Registered: July 2007
Location: Sydney, Australia

Karma: 6

Senior Member

G'Day,

Avions use 5 screws inserted through the tank which light up bulbs labeled E
- 1/4 - 1/2 - 3/4 - F.

IIRC they are located close to the large dump hole and were inserted from
the inside out. I believe they are brass or stainless steel.

So far they seem to give accurate readings.

Regards,
Rob M.
USAussie - Downunder
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Regards, Rob M. (USAussie) The Pedantic Mechanic Sydney, Australia '75 Avion - AUS - The Blue Streak TZE365V100428 '75 Avion - USA - Double Trouble TZE365V100426

Report message to a moderator

Re: [GMCnet] jrv monitor [message #122331 is a reply to message #122317]

Tue, 19 April 2011 11:11

James Hupy

Messages: 6806
Registered: May 2010

Karma: -62

Senior Member

Kinda makes one wonder. Let me see, I should clean that black tank in order
to refill it with crap? What about that doesn't make sense to me. Flush the
toilet and look into the tank. If it is full, empty it.
Jim Hupy
Salem, OR
78 GMC Royale 403

On Tue, Apr 19, 2011 at 7:15 AM, Rob Mueller <robmueller@iinet.net.au>wrote:

> G'Day,
>
> Avions use 5 screws inserted through the tank which light up bulbs labeled
> E
> - 1/4 - 1/2 - 3/4 - F.
>
> IIRC they are located close to the large dump hole and were inserted from
> the inside out. I believe they are brass or stainless steel.
>
> So far they seem to give accurate readings.
>
> Regards,
> Rob M.
> USAussie - Downunder
> AUS '75 Avion - The Blue Streak TZE365V100428
> USA '75 Avion - Double Trouble TZE365V100426
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] jrv monitor [message #122374 is a reply to message #122316]

Tue, 19 April 2011 15:52

Steven Ferguson

Messages: 3447
Registered: May 2006

Karma: 0

Senior Member

Armand,
I have just the opposite story to tell. Mine never quit working properly.
Maybe because I had a cleanout port on the tank where the old sending unit
used to mount.

On Tue, Apr 19, 2011 at 6:58 AM, Armand Minnie <armand@minniebiz.com> wrote:

>
>
> I am sorry to say that the probes in the black tank are not worth the time
> to install. They do not work. "Stuff" apparently just hangs on them and
> gives false readings and no amount of cleaning fixes it. I even took the
> probe screws out rounded off the ends and polished them hoping to stop the
> false readings but it did not help. There are probes available that claim
> to work because they have sort of a 'roof' over them but they want $30-$40
> for them and by the time I found them I had already switched over to the
> "when the water tank is empty the holding tank is full" method which works
> fine.
> --
> Armand Minnie
> Marana, AZ
> '76 Eleganza II
> TZE166V103202
> http://www.minniebiz.com
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>

--
Steve Ferguson
Sierra Vista, AZ
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] jrv monitor [message #122384 is a reply to message #122374]

Tue, 19 April 2011 17:23

WD0AFQ

Messages: 7111
Registered: November 2004
Location: Dexter, Mo.

Karma: 207

Senior Member

I have a new monitor that has not been installed yet. The screws are inside the well nuts at least 1/16th of an inch. Will this help to keep from getting stuff stuck on them or will it just fill the nuts? I don't have a clue, but seems this would work better than having a screw sticking out for stuff to catch on.
I never hook to city water. We get about 2 35 gallon tanks of fresh water to the black. Must be the gray water drains we have, when we need them. Very Happy

Dan

3 In Stainless Exhaust Headers One Ton All Discs/Reaction Arm 355 FD/Quad Bag/Alum Radiator Manny Tran/New eng. Holley EFI/10 Tire Air Monitoring System Solarized Coach/Upgraded Windows Satelite TV/On Demand Hot Water/3Way Refer

Report message to a moderator

Previous Topic:	Parts GMC In Edmonton Alberta
Next Topic:	Cellular Phone Signal Booster

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Nov 15 00:05:20 CST 2024

Total time taken to generate the page: 0.02319 seconds