GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Royale dinette set question
Royale dinette set question [message #122055] Sat, 16 April 2011 17:06 Go to next message
thorndike is currently offline  thorndike   United States
Messages: 406
Registered: January 2011
Location: Conifer, Colorado
Karma: 0
Senior Member
I have a '76 Royale. The rear dinette seat sits over the propane tank making me wonder if the original dinette folded flat into a bed.

Did the original Royale come with a dinette set that folded flat into a bed?

If so, does anyone know of a source for the mechanism? The previous owner removed the mechanism (if there was one) and put a hard bench in place instead. I would like to turn that back into a sleeping option.


Robert Peesel 1976 Royale 26' Side Dry Bath Conifer, Colorado
Re: Royale dinette set question [message #122067 is a reply to message #122055] Sat, 16 April 2011 19:21 Go to previous messageGo to next message
mike miller   United States
Messages: 3576
Registered: February 2004
Location: Hillsboro, Oregon
Karma: 0
Senior Member
thorndike wrote on Sat, 16 April 2011 15:06

I have a '76 Royale. The rear dinette seat sits over the propane tank making me wonder if the original dinette folded flat into a bed.

Did the original Royale come with a dinette set that folded flat into a bed? ...


All the Coachman Royale/Birchavens I have seen, (in stock condition) had a metal framed dinette. I do not know who made it. They have a release lever on the side under a padded side piece. While I have seen Coachman's with wooden dinettes, I think most where changed by owners though the years.

For your info:

-- The Coachman dinette is a little wider than the Flexsteel made dinette in the later GM models and the about the same width as most wooden dinettes. I think the metal GM dinette is easiest to use. We find Wood framed dinettes the hardest to put up and take down. They normally use the table as part of the bed. Metal framed dinettes do not use the table as part of the bed configuration... allowing the use of the tables with folding side leaves.

-- While the metal dinettes are better for sitting, I find the wood and foam based dinettes (like early GM and others) more comfortable for sleeping.

-- What is best for you use is up to you. For example: My wife doesn't like riding in the cockpit passenger seat and normally rides in the dinette... so we need a metal framed dinette.


Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo' http://m000035.blogspot.com
Re: Royale dinette set question [message #122073 is a reply to message #122067] Sat, 16 April 2011 20:13 Go to previous message
thorndike is currently offline  thorndike   United States
Messages: 406
Registered: January 2011
Location: Conifer, Colorado
Karma: 0
Senior Member
Thanks,

Right now, I'd be interested in either. Since we will have someone riding in the dinette occassionally, I guess we should be looking to locate a metal frame.

Bob


Robert Peesel 1976 Royale 26' Side Dry Bath Conifer, Colorado
Previous Topic: Last Of The Photos
Next Topic: Re: [GMCnet] Today's GMC Motorhome bargains
Goto Forum:
  


Current Time: Tue Nov 05 18:17:35 CST 2024

Total time taken to generate the page: 0.00850 seconds