| Stabilizer bar bushings - again [message #121534] |
Mon, 11 April 2011 14:49  |
thorndike
Messages: 406
Registered: January 2011
Location: Conifer, Colorado
Karma: 0
|
Senior Member |
|
|
Well, I have been under the coach putting on my new stabilizer bushings. Unfortunately I received bushings for a 1-1/16th inch bar instead of the 1-3/8ths inch bar that is actually under there.
I called appliedgmc and they don't carry a 1-3/8ths bushing. www.suspension.com has them, but RARELY sells any. Is my coach and odd-ball? Is this not an original stabilizer bar?
Bob
Robert Peesel
1976 Royale 26'
Side Dry Bath
Conifer, Colorado
|
|
|
|
|
|
| Re: [GMCnet] Stabilizer bar bushings - again [message #121538 is a reply to message #121537] |
Mon, 11 April 2011 14:58  |
thorndike
Messages: 406
Registered: January 2011
Location: Conifer, Colorado
Karma: 0
|
Senior Member |
|
|
Well then, I guess I had better call Caspro and get ALL the bushings from them just to make sure they are correct.
I am always amazed at the amount of knowledge on this forum.
Thanks Emory.
Bob
Robert Peesel
1976 Royale 26'
Side Dry Bath
Conifer, Colorado
|
|
|
|
| Re: Stabilizer bar bushings - again [message #121961 is a reply to message #121534] |
Fri, 15 April 2011 21:51 |
Bob de Kruyff
Messages: 4260
Registered: January 2004
Location: Chandler, AZ
Karma: 1
|
Senior Member |
|
|
| thorndike wrote on Mon, 11 April 2011 13:49 |
Well, I have been under the coach putting on my new stabilizer bushings. Unfortunately I received bushings for a 1-1/16th inch bar instead of the 1-3/8ths inch bar that is actually under there.
I called appliedgmc and they don't carry a 1-3/8ths bushing. www.suspension.com has them, but RARELY sells any. Is my coach and odd-ball? Is this not an original stabilizer bar?
Bob
|
I have the larger bar and bushings are readily available at Autozone
Bob de Kruyff
78 Eleganza
Chandler, AZ
|
|
|
|
| Re: [GMCnet] Stabilizer bar bushings - again [message #121971 is a reply to message #121534] |
Fri, 15 April 2011 22:21 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Robert,
I'm sorry that I thought I had taken care of this part for you through
our office.
There is no reason why we cannot supply that part for you.
I have been at the GMC International Convention and have had problem
with the connections.
I will be back Monday and start o it if you have not yet acquire one.
Where did you get the stab. bar?
On Mon, Apr 11, 2011 at 12:49 PM, Robert Peesel <thorndike@pldsllc.com> wrot
> Well, I have been under the coach putting on my new stabilizer bushings. Unfortunately I received bushings for a 1-1/16th inch bar instead of the 1-3/8ths inch bar that is actually under there.
>
> I called appliedgmc and they don't carry a 1-3/8ths bushing. www.suspension.com has them, but RARELY sells any. Is my coach and odd-ball? Is this not an original stabilizer bar?
>
> Bob
> --
> Robert Peesel
>
> 1976 Royale 26'
>
> Side Dry Bath
>
> Sterling, Va
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] Stabilizer bar bushings - again [message #122008 is a reply to message #121971] |
Sat, 16 April 2011 11:09 |
thorndike
Messages: 406
Registered: January 2011
Location: Conifer, Colorado
Karma: 0
|
Senior Member |
|
|
Jim,
It turns out the P.O. replaced the original stabilizer bar with a Caspro unit.
I have already received the bushings so please don't worry about it. I was hoping to install them today, but the constant thunder and rain has kept me from going outside.
Bob
Robert Peesel
1976 Royale 26'
Side Dry Bath
Conifer, Colorado
|
|
|
|
| Re: [GMCnet] Stabilizer bar bushings - again [message #122104 is a reply to message #122008] |
Sun, 17 April 2011 10:37 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Bob,
The way we operate, it is never acceptable for anyone here to tell you
we do not stock it.
I know we stock them, but sold the last one and they did not reorder
as we might sell 2 a year.
Sorry for the crappy service. I am meeting with Nick this AM (Sunday)
and will be raising the roof about this.
I have designed the GMC side to operate with or with out me there.
On Sat, Apr 16, 2011 at 9:09 AM, Robert Peesel <thorndike@pldsllc.com> wrote:
>
>
> Jim,
>
> It turns out the P.O. replaced the original stabilizer bar with a Caspro unit.
>
> I have already received the bushings so please don't worry about it. I was hoping to install them today, but the constant thunder and rain has kept me from going outside.
>
> Bob
> --
> Robert Peesel
>
> 1976 Royale 26'
>
> Side Dry Bath
>
> Sterling, Va
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
