| Re: [GMCnet] Refridgerator door [message #118782] |
Mon, 14 March 2011 11:31  |
David L Greenberg
Messages: 899
Registered: January 2004
Location: Port St Lucie, FL
Karma: 0
|
Senior Member |
|
|
On Mon, 14 Mar 2011 09:00:02 -0500 Jeremy <jtknezek@hotmail.com> writes:
>
>
> I'm not sure about getting a new door, but what I did was simply
> take the door off, carefully remove the outer trim, then slide out
> the door panels. Clean and lightly sand the panels, then prime and
> paint the door panels with appliance paint, available at HD or
> Lowes. Repeat with the trim which I believe is just plastic. I
> painted the panels appliance paint white and the trim a gunmetal
> grey and it looks and holds up very well. The other thing you can
> do, especially if you are redoing your countertops, is get an extra
> piece of the formica and just insert it in the door in place of the
> original door panels. We were going that route until we decided that
> there is such a thing as too much of a good thing and went with the
> contrasting paint.
> --
> Thanks,
> Jeremy Knezek
> 1976 Glenbrook
> Birmingham, AL
>
I think he was asking about the hatch behind the fridge.
David Lee Greenberg
Port St Lucie, FL skype: david.lee.greenberg
Dedicated to the Preservation of the Classic GMC Motorhome
http://GMCmhRegistry.com
http://www.picturetrail.com/gmcregistry
____________________________________________________________
Mortgage Rates Hit 2.99%
If you owe under $729k you probably qualify for Gov't Refi Programs
http://thirdpartyoffers.juno.com/TGL3141/4d7e432a93b471d58fm02duc
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Dave Greenberg
Dedicated to the Preservation of the GMC Clasic
http:GMCmhRegistry.com
davegreenberg1@juno.com
|
|
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
