Home » Public Forums » GMCnet » [GMCnet] Tracker rear panel clips
|
|
| Re: [GMCnet] Tracker rear panel clips [message #118473 is a reply to message #118446] |
Fri, 11 March 2011 19:52   |
rvanwin
Messages: 325
Registered: April 2007
Location: Battlefield, MO
Karma: 6
|
Senior Member |
|
|
| Gary Worobec wrote on Fri, 11 March 2011 14:36 |
Hi,
If anyone is looking to replace the clips that hold the plastic panel to the tailgate of the 1990's vintage Trackers they can be had from NAPA #665-2388 pkg of 7. You need two packages to replace them all.
|
Gary, Thanks for the information. I will keep that in mind. I have a '94 Sidekick I'm getting ready for towing (replacing the heavy Jeep Wrangler I now pull). I'm looking for Roadmaster base plates if anyone is trying to get rid of some? I'm currently in CA heading home to MO over the next couple of weeks so ideally save shipping by finding them along the way.
Randy & Margie
'77 Eleganza II '403'
Battlefield, MO
|
|
|
|
| Re: [GMCnet] Tracker rear panel clips [message #118510 is a reply to message #118473] |
Sat, 12 March 2011 08:10 |
 |
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Bob,
Larry's Tracker is going to a good home. I'm towing it up to Chuck Boyd's
place when I head to the Bean Station Rally.
If anybody knows the whereabouts of a good engine let Chuck know.
Regards,
Rob M.
USAussie - Downunder
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Bob Drewes
Sent: Sunday, March 13, 2011 12:56 AM
To: gmclist@temp.gmcnet.org
Subject: Re: [GMCnet] Tracker rear panel clips
Randy;
Larry Weidner shelled out the engine in the Tracker they were towing, last I
heard they were going to salvage it out. Don't know what style base plate he
was using, you can contact him at mailto:weidnerl@wwt.net
You can check out Roadmaster base plates here;
http://www.roadmasterinc.com/vehicle_guide/tow_bar_brackets.php
Bob Drewes in SESD
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
| Re: [GMCnet] Tracker rear panel clips [message #118520 is a reply to message #118510] |
Sat, 12 March 2011 10:01 |
|
|
There is a Tracker graveyard somewhere north of Houston that Burt
Doucette told me about. Ol hippie dude has everything and anything
you'd want for a Tracker. Lots of hulks in every state of dismantle
and repair sitting around. Rob, you should have access to Burt's
contact info. I'll holler by PM.
bdub
On Sat, Mar 12, 2011 at 8:10 AM, Rob Mueller <robmueller@iinet.net.au> wrote:
> Bob,
>
> Larry's Tracker is going to a good home. I'm towing it up to Chuck Boyd's
> place when I head to the Bean Station Rally.
>
> If anybody knows the whereabouts of a good engine let Chuck know.
>
> Regards,
> Rob M.
> USAussie - Downunder
> AUS '75 Avion - The Blue Streak TZE365V100428
> USA '75 Avion - Double Trouble TZE365V100426
>
>
> -----Original Message-----
> From: gmclist-bounces@temp.gmcnet.org
> [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Bob Drewes
> Sent: Sunday, March 13, 2011 12:56 AM
> To: gmclist@temp.gmcnet.org
> Subject: Re: [GMCnet] Tracker rear panel clips
>
> Randy;
> Larry Weidner shelled out the engine in the Tracker they were towing, last I
> heard they were going to salvage it out. Don't know what style base plate he
> was using, you can contact him at mailto:weidnerl@wwt.net
>
> You can check out Roadmaster base plates here;
>
>
> http://www.roadmasterinc.com/vehicle_guide/tow_bar_brackets.php
>
> Bob Drewes in SESD
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
bdub
bdub.net
|
|
|
|
| Re: [GMCnet] Tracker rear panel clips [message #118524 is a reply to message #118520] |
Sat, 12 March 2011 10:10 |
gene1
Messages: 50
Registered: February 2004
Location: Southern California
Karma: 0
|
Member |
|
|
Chuck,
I have a 94 Tracker with a good engine that my neighbor backed into, that I
will sell cheap. It is drivable and is near San Diego. Any interest?
Regards, Gene 76 Eleganza North County San Diego
----- Original Message -----
From: "Billy Massey" <bdub.bdub@gmail.com>
To: <gmclist@temp.gmcnet.org>
Sent: Saturday, March 12, 2011 8:01 AM
Subject: Re: [GMCnet] Tracker rear panel clips
There is a Tracker graveyard somewhere north of Houston that Burt
Doucette told me about. Ol hippie dude has everything and anything
you'd want for a Tracker. Lots of hulks in every state of dismantle
and repair sitting around. Rob, you should have access to Burt's
contact info. I'll holler by PM.
bdub
On Sat, Mar 12, 2011 at 8:10 AM, Rob Mueller <robmueller@iinet.net.au>
wrote:
> Bob,
>
> Larry's Tracker is going to a good home. I'm towing it up to Chuck Boyd's
> place when I head to the Bean Station Rally.
>
> If anybody knows the whereabouts of a good engine let Chuck know.
>
> Regards,
> Rob M.
> USAussie - Downunder
> AUS '75 Avion - The Blue Streak TZE365V100428
> USA '75 Avion - Double Trouble TZE365V100426
>
>
> -----Original Message-----
> From: gmclist-bounces@temp.gmcnet.org
> [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Bob Drewes
> Sent: Sunday, March 13, 2011 12:56 AM
> To: gmclist@temp.gmcnet.org
> Subject: Re: [GMCnet] Tracker rear panel clips
>
> Randy;
> Larry Weidner shelled out the engine in the Tracker they were towing, last
> I
> heard they were going to salvage it out. Don't know what style base plate
> he
> was using, you can contact him at mailto:weidnerl@wwt.net
>
> You can check out Roadmaster base plates here;
>
>
> http://www.roadmasterinc.com/vehicle_guide/tow_bar_brackets.php
>
> Bob Drewes in SESD
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Tracker rear panel clips [message #118539 is a reply to message #118520] |
Sat, 12 March 2011 14:10 |
Mr ERFisher
Messages: 7117
Registered: August 2005
Karma: 2
|
Senior Member |
|
|
Wait. Wait I want to know also
Gene
Sent from McDonalds
On Mar 12, 2011, at 8:01 AM, Billy Massey <bdub.bdub@gmail.com> wrote:
> There is a Tracker graveyard somewhere north of Houston that Burt
> Doucette told me about. Ol hippie dude has everything and anything
> you'd want for a Tracker. Lots of hulks in every state of dismantle
> and repair sitting around. Rob, you should have access to Burt's
> contact info. I'll holler by PM.
>
> bdub
>
>
> On Sat, Mar 12, 2011 at 8:10 AM, Rob Mueller <robmueller@iinet.net.au> wrote:
>> Bob,
>>
>> Larry's Tracker is going to a good home. I'm towing it up to Chuck Boyd's
>> place when I head to the Bean Station Rally.
>>
>> If anybody knows the whereabouts of a good engine let Chuck know.
>>
>> Regards,
>> Rob M.
>> USAussie - Downunder
>> AUS '75 Avion - The Blue Streak TZE365V100428
>> USA '75 Avion - Double Trouble TZE365V100426
>>
>>
>> -----Original Message-----
>> From: gmclist-bounces@temp.gmcnet.org
>> [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Bob Drewes
>> Sent: Sunday, March 13, 2011 12:56 AM
>> To: gmclist@temp.gmcnet.org
>> Subject: Re: [GMCnet] Tracker rear panel clips
>>
>> Randy;
>> Larry Weidner shelled out the engine in the Tracker they were towing, last I
>> heard they were going to salvage it out. Don't know what style base plate he
>> was using, you can contact him at mailto:weidnerl@wwt.net
>>
>> You can check out Roadmaster base plates here;
>>
>>
>> http://www.roadmasterinc.com/vehicle_guide/tow_bar_brackets.php
>>
>> Bob Drewes in SESD
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Tracker rear panel clips [message #118546 is a reply to message #118539] |
Sat, 12 March 2011 14:34 |
Gary Worobec
Messages: 867
Registered: May 2005
Karma: -1
|
Senior Member |
|
|
There is also a Tracker graveyard on the west coast in Fallbrook, CA. Owned
by the fellow that owns Petroworks, a Tracker/Samurai after market supplier.
Must have 30 vehicles there. I got a set of good seats for $75.00. Ask for
Gary
http://www.petroworks.com/
thanks
Gary and Joanne Worobec
1973 GMC Glacier
Anza, CA
----- Original Message -----
From: <mr.erfisher@gmail.com>
To: <gmclist@temp.gmcnet.org>
Sent: Saturday, March 12, 2011 12:13 PM
Subject: Re: [GMCnet] Tracker rear panel clips
> Wait. Wait I want to know also
> Gene
>
> Sent from McDonalds
>
>
>
>
>
>
> On Mar 12, 2011, at 8:01 AM, Billy Massey <bdub.bdub@gmail.com> wrote:
>
>> There is a Tracker graveyard somewhere north of Houston that Burt
>> Doucette told me about. Ol hippie dude has everything and anything
>> you'd want for a Tracker. Lots of hulks in every state of dismantle
>> and repair sitting around. Rob, you should have access to Burt's
>> contact info. I'll holler by PM.
>>
>> bdub
>>
>>
>> On Sat, Mar 12, 2011 at 8:10 AM, Rob Mueller <robmueller@iinet.net.au>
>> wrote:
>>> Bob,
>>>
>>> Larry's Tracker is going to a good home. I'm towing it up to Chuck
>>> Boyd's
>>> place when I head to the Bean Station Rally.
>>>
>>> If anybody knows the whereabouts of a good engine let Chuck know.
>>>
>>> Regards,
>>> Rob M.
>>> USAussie - Downunder
>>> AUS '75 Avion - The Blue Streak TZE365V100428
>>> USA '75 Avion - Double Trouble TZE365V100426
>>>
>>>
>>> -----Original Message-----
>>> From: gmclist-bounces@temp.gmcnet.org
>>> [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Bob Drewes
>>> Sent: Sunday, March 13, 2011 12:56 AM
>>> To: gmclist@temp.gmcnet.org
>>> Subject: Re: [GMCnet] Tracker rear panel clips
>>>
>>> Randy;
>>> Larry Weidner shelled out the engine in the Tracker they were towing,
>>> last I
>>> heard they were going to salvage it out. Don't know what style base
>>> plate he
>>> was using, you can contact him at mailto:weidnerl@wwt.net
>>>
>>> You can check out Roadmaster base plates here;
>>>
>>>
>>> http://www.roadmasterinc.com/vehicle_guide/tow_bar_brackets.php
>>>
>>> Bob Drewes in SESD
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
Goto Forum:
Current Time: Fri Sep 27 12:04:19 CDT 2024
Total time taken to generate the page: 0.01350 seconds
|
GMCforum
Search
Help
Register
Login
Home
