| Re: [GMCnet] GMC engine problems again for Dan and Teri [message #115110] |
Tue, 15 February 2011 14:58  |
rallymaster
Messages: 662
Registered: February 2004
Location: North Plains, ORYGUN
Karma:
|
Senior Member |
|
|
Clog up the oil filter, and it will use the filter bypass route to the
engine
RonC
On Tue, 15 Feb 2011 14:22:55 -0600 Ken Burton <n9cv@comcast.net> writes:
>
>
> Here is what I do not understand. I thought I looked this up
> before. I thought that the oil flow is:
>
> 1. Oil pan
> 2. Engine oil pump
> 3. Lines to the oil cooler
> 4. Oil cooler
> 5. Line back to the oil filter adapter
> 6. Oil filter
> 7. Through the various parts of the engine
> 8. Back to the pan.
>
> If this flow is true then the existing oil filter ought to capture
> any particles left in the oil cooler.
>
> If the above flow is incorrect and oil goes through the oil filter
> BEFORE it goes through the oil cooler, then there should not be any
> particles in the cooler in the first place.
>
> I would be more likely to blame the oil filter for not trapping the
> smaller particles. Maybe we should be looking for filter that traps
> smaller particles and use it after a new engine install.
> --
> Ken Burton - N9KB
> 76 Palm Beach
> Hebron, Indiana
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
Ron & Linda Clark
1978 Eleganza II
North Plains, ORYGUN
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ron & Linda Clark
North Plains, ORYGUN
78 Eleganza II
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
