GMCforum: GMCnet » [GMCnet] Hubler Front end

Home » Public Forums » GMCnet » [GMCnet] Hubler Front end

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Hubler Front end [message #114173]

Fri, 04 February 2011 11:18

GMC_LES

Messages: 569
Registered: October 2009
Location: Montreal

Karma:

Senior Member

Just wondering�about the effects of the Hubler front hub upgrade on the Stock
GMC torsion bars. The way I see it, the Hubler mod moves the wheels�outwards, as
well as the lower ball joint pivot point. this increases�the lever effect of the
lower suspension arm on the torsion bar. �This would result in additional forces
being appied to the stock torsion bar than wit hthe stock hubs. Is this of any
concern for our 35 year old bars?

Bill Hubler�suggests using the 1 ton torsion bars which are shorter and larger
in diameter. This sounds like a good upgrade to include with the hubs, but I
would expect these bars to have an effect on ride quality and stiffness.

While on the Hubler subject, does anyone know if the bearing & seal can be
replaced on the 1-ton hub, or is it necessary to replace the complete hub as an
assy. A web search only shows the complete hubs but in Dan's blog, Jimk shows a
hub partially dismantled to show the bearing size differences. This leads me to
believe that a bearing replacement alone might be possible.

I'd like to hear opinions and experiences on this subject as it is a mod that I
am considering while my coach is in pieces.

Thanks,
Les Burt
Montreal
ELII in pieces

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Les Burt Montreal 1975 Eleganza 26ft A work in Progress

Report message to a moderator

[Message index]

		[GMCnet] Hubler Front end By: GMC_LES on Fri, 04 February 2011 11:18
		Re: [GMCnet] Hubler Front end By: James Hupy on Fri, 04 February 2011 12:10
		Re: [GMCnet] Hubler Front end By: WD0AFQ on Fri, 04 February 2011 12:47
		Re: [GMCnet] Hubler Front end By: GMC_LES on Fri, 04 February 2011 13:32
		Re: [GMCnet] Hubler Front end By: ejuk8em on Fri, 04 February 2011 14:03
		Re: [GMCnet] Hubler Front end By: cbwoodsr on Fri, 04 February 2011 14:30
		Re: [GMCnet] Hubler Front end By: USAussie on Fri, 04 February 2011 14:57
		Re: [GMCnet] Hubler Front end By: jimk on Fri, 04 February 2011 15:26
		Re: [GMCnet] Hubler Front end By: WD0AFQ on Fri, 04 February 2011 15:56
		Re: [GMCnet] Hubler Front end By: GMC_LES on Fri, 04 February 2011 17:30
		Re: [GMCnet] Hubler Front end By: USAussie on Fri, 04 February 2011 19:51
		Re: [GMCnet] Hubler Front end By: GMC_LES on Fri, 04 February 2011 20:17
		Re: [GMCnet] Hubler Front end By: USAussie on Fri, 04 February 2011 20:52
		Re: [GMCnet] Hubler Front end By: jimk on Fri, 04 February 2011 23:28
		Re: [GMCnet] Hubler Front end By: jimk on Fri, 04 February 2011 20:15
		Re: [GMCnet] Hubler Front end By: Ken Henderson on Fri, 04 February 2011 18:49
		Re: [GMCnet] Hubler Front end By: ljdavick on Tue, 08 February 2011 14:22
		Re: [GMCnet] Hubler Front end By: USAussie on Tue, 08 February 2011 17:05
		Re: [GMCnet] Hubler Front end By: jimk on Wed, 09 February 2011 00:37
		Re: [GMCnet] Hubler Front end By: ljdavick on Wed, 09 February 2011 00:57
		Re: [GMCnet] Hubler Front end By: USAussie on Wed, 09 February 2011 03:23
		Re: [GMCnet] Hubler Front end By: WD0AFQ on Wed, 09 February 2011 10:09
		Re: [GMCnet] Hubler Front end By: Gil Slaw on Tue, 08 February 2011 18:24
		Re: [GMCnet] Hubler Front end By: WD0AFQ on Tue, 08 February 2011 18:47
		Re: [GMCnet] Hubler Front end By: Gil Slaw on Tue, 08 February 2011 19:15
		Re: [GMCnet] Hubler Front end By: Gil Slaw on Tue, 08 February 2011 19:41
		Re: [GMCnet] Hubler Front end By: WD0AFQ on Tue, 08 February 2011 19:53
		Re: [GMCnet] Hubler Front end By: KRDietz on Tue, 08 February 2011 21:29
		Re: [GMCnet] Hubler Front end By: Steven Ferguson on Wed, 09 February 2011 05:05
		Re: [GMCnet] Hubler Front end By: Hardie Johnson on Fri, 04 February 2011 19:49
		Re: [GMCnet] Hubler Front end By: Steven Ferguson on Sat, 05 February 2011 07:15
		Re: [GMCnet] Hubler Front end By: Dave Mumert on Fri, 04 February 2011 12:40
		Re: [GMCnet] Hubler Front end By: Gerald Wheeler on Fri, 04 February 2011 09:52
		Re: [GMCnet] Hubler Front end By: WD0AFQ on Fri, 04 February 2011 13:51
		Re: [GMCnet] Hubler Front end By: g.winger on Fri, 04 February 2011 16:05
		Re: [GMCnet] Hubler Front end By: storm'n on Fri, 04 February 2011 17:51
		Re: [GMCnet] Hubler Front end By: g.winger on Fri, 04 February 2011 20:26
		Re: [GMCnet] Hubler Front end By: mike miller on Fri, 04 February 2011 20:29
		Re: [GMCnet] Hubler Front end By: bwevers on Tue, 08 February 2011 19:01
		Re: [GMCnet] Hubler front end By: Mr ERFisher on Sat, 15 October 2011 10:59

Previous Topic:	Electrical problem
Next Topic:	W/Wiper instructions

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Nov 05 22:29:07 CST 2024

Total time taken to generate the page: 0.06605 seconds