Quadrajet gasket [message #114112] |
Thu, 03 February 2011 22:02 |
Wander Inn
Messages: 100 Registered: January 2010 Location: Phoenix Az.
Karma: 0
|
Senior Member |
|
|
Just had my carburator rebuilt. what should the
manifold to carb gasket look like? I have one with
3 holes & one with 1 hole. Or does it matter.
Mike
Mike & Chris Hughes
1977 Kingsley
Phoenix, Az.
|
|
|
|
|
Re: [GMCnet] Quadrajet gasket [message #114119 is a reply to message #114115] |
Thu, 03 February 2011 22:46 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Lot depends on the hole of the intake.
Always check that the throttle plates clear them. Also thicker gaskets
might aid in keeping the carb cooler.
On Thu, Feb 3, 2011 at 8:38 PM, Rob Mueller <robmueller@iinet.net.au> wrote:
> Mike,
>
> Dick Patterson provides a four hole gasket with his rebuilt carbs. It has
> plastic spacers at each of the bolt holes to keep over zealous mechanics who
> don't believe in torque wrenches from applying too much torque to the carb
> bolts and warping the carb.
>
> Mr. Gasket makes a four hole "1/4" heat dissipater gasket kit."
>
> Gasket
> Aluminum spacer
> Gasket
> Aluminum spacer
> Gasket
>
> They make the same thing in 1/2" but that may create problems and cause your
> air filter to hit the bottom of the engine hatch.
>
> Do a Google search and you'll find them.
>
> Regards,
> Rob M.
> USAussie - Downunder
> AUS '75 Avion - The Blue Streak TZE365V100428
> USA '75 Avion - Double Trouble TZE365V100426
>
>
> -----Original Message-----
> From: gmclist-bounces@temp.gmcnet.org
> [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Mike & Chris Hughes
> Sent: Friday, February 04, 2011 3:03 PM
> To: gmclist@temp.gmcnet.org
> Subject: [GMCnet] Quadrajet gasket
>
>
>
> Just had my carburator rebuilt. what should the
>
> manifold to carb gasket look like? I have one with
>
> 3 holes & one with 1 hole. Or does it matter.
>
> Mike
> --
> Mike & Chris Hughes
> 1977 Kingsley
> Wander Inn
> Phoenix, Az.
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
Re: [GMCnet] Quadrajet gasket [message #114180 is a reply to message #114156] |
Fri, 04 February 2011 11:43 |
Carl S.
Messages: 4186 Registered: January 2009 Location: Tucson, AZ.
Karma: 13
|
Senior Member |
|
|
I used the four hole Mr. Gasket heat dissipater that Rob mentioned. I don't know how much it helps but, in southern Arizona anything to keep the carb cooler is a good thing.
Carl Stouffer
'75 ex Palm Beach
Tucson, AZ.
Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member
|
|
|
|