GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] plastic plenum on the pass side firewall
[GMCnet] plastic plenum on the pass side firewall [message #112913] Mon, 24 January 2011 10:44 Go to previous message
Gary Worobec is currently offline  Gary Worobec   United States
Messages: 867
Registered: May 2005
Karma:
Senior Member
Hi,
On the passenger side firewall right above the batteries is a black plastic plenum with a vaccum assist cannister on it that is pop riveted to the aluminum firewall. If I cut into this with 2 1/2" heater duct will this feed the cabin heat or is this for the windshield defrost.? I took out the OEM heater a while back and now want to add an auxiliary heater back in.

Thanks

Gary and Joanne Worobec
1973 GMC Glacier
Anza, CA
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Re: [GMCnet] yamaha inverter generator: how to run inside?
Next Topic: [GMCnet] Propane
Goto Forum:
  


Current Time: Mon Sep 30 02:18:35 CDT 2024

Total time taken to generate the page: 0.02918 seconds