GMCforum: GMCnet » drip channel

Home » Public Forums » GMCnet » drip channel

Show: Today's Messages :: Polls :: Message Navigator

drip channel [message #111179]

Fri, 07 January 2011 02:23

jayrabe

Messages: 509
Registered: June 2009
Location: Portland, OR

Karma:

Senior Member

Getting started tearing bedroom apart to insulate and build a tilt bed. When I got the walls off, I saw what appears to be some kind of drip channel running horizontally about 8" below the side window, and it's got about 1/4" of water in it. Haven't seen any active leaks from roof or windows during heavy rain, but where is this water coming in? Could it be from the rub strip that covers the fiberglass-aluminum joint? Same situation on driver's side. And is this channel supposed to drain somewhere, or just evaporate?

http://www.gmcmhphotos.com/photos/showphoto.php?photo=37275&title=drip-channel&cat=5410

Thanks,

J
76 PB
Portland, OR

Report message to a moderator

[Message index]

		drip channel By: jayrabe on Fri, 07 January 2011 02:23
		Re: [GMCnet] drip channel By: Mr ERFisher on Fri, 07 January 2011 04:15
		Re: [GMCnet] drip channel By: Hardie Johnson on Fri, 07 January 2011 07:08
		Re: drip channel By: mike miller on Fri, 07 January 2011 06:06
		Re: [GMCnet] drip channel By: Ken Henderson on Fri, 07 January 2011 05:58
		Re: [GMCnet] drip channel By: Bill Massey on Fri, 07 January 2011 08:54
		Re: [GMCnet] drip channel By: powerjon on Fri, 07 January 2011 06:56
		Re: drip channel By: Bob de Kruyff on Fri, 07 January 2011 11:16
		Re: [GMCnet] drip channel By: jayrabe on Fri, 07 January 2011 12:55
		Re: [GMCnet] drip channel By: cbwoodsr on Fri, 07 January 2011 13:45
		Re: [GMCnet] drip channel By: jayrabe on Fri, 07 January 2011 14:56
		Re: [GMCnet] drip channel By: Hardie Johnson on Fri, 07 January 2011 20:23
		Re: [GMCnet] drip channel By: James Hupy on Fri, 07 January 2011 22:54
		Re: [GMCnet] drip channel By: jayrabe on Fri, 07 January 2011 23:17
		Re: [GMCnet] drip channel By: James Hupy on Fri, 07 January 2011 23:27
		Re: [GMCnet] drip channel By: Richard Denney on Fri, 07 January 2011 11:39
		Re: [GMCnet] drip channel By: Mr ERFisher on Fri, 07 January 2011 11:56
		Re: [GMCnet] drip channel By: Richard Denney on Fri, 07 January 2011 12:21

Previous Topic:	Re: [GMCnet] Aluminum Intake and Sucking Oil #2
Next Topic:	Rolling Toward Quartzsite

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Sep 29 02:34:52 CDT 2024

Total time taken to generate the page: 0.00997 seconds