[GMCnet] lifter valley piece mystery solved. [message #111091] |
Thu, 06 January 2011 16:19 |
Gary Worobec
Messages: 867 Registered: May 2005
Karma: -1
|
Senior Member |
|
|
Mystery solved, the piece that Mondello sent is the pressed steel "snake like deal" OEM oil control rail that bolts into the V of the block at the very bottom. I have one of those installed so I called and they will trade it for the VT-581 Valley tray. Question I forgot to ask is if you use both the Valley tray on top of the oil control deal?
Thanks
Gary and Joanne Worobec
1973 GMC Glacier
Anza, CA
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] lifter valley piece mystery solved. [message #111099 is a reply to message #111091] |
Thu, 06 January 2011 17:05 |
Dennis S
Messages: 3046 Registered: November 2005
Karma: 2
|
Senior Member |
|
|
Gary,
One or the other -- but not both. Some folks have speculated that in colder climates the OEM might provide a little more heat to the bottom of the manifold which, if the crossover is blocked, would be a good thing for cold start up.
I used the VT 581.
Dennis
Dennis Sexton
73 GMC 230
Germantown, TN
USA
-----Original Message-----
From: Gary Worobec <gtw5@earthlink.net>
To: gmclist@temp.gmcnet.org
Sent: Thu, Jan 6, 2011 4:19 pm
Subject: [GMCnet] lifter valley piece mystery solved.
Mystery solved, the piece that Mondello sent is the pressed steel "snake like
eal" OEM oil control rail that bolts into the V of the block at the very
ottom. I have one of those installed so I called and they will trade it for the
T-581 Valley tray. Question I forgot to ask is if you use both the Valley tray
n top of the oil control deal?
Thanks
Gary and Joanne Worobec
973 GMC Glacier
nza, CA
______________________________________________
MCnet mailing list
ist Information and Subscription Options:
ttp://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Dennis S
73 Painted Desert 230
Memphis TN Metro
|
|
|
|
Re: [GMCnet] lifter valley piece mystery solved. [message #111195 is a reply to message #111091] |
Fri, 07 January 2011 07:31 |
Steven Ferguson
Messages: 3447 Registered: May 2006
Karma: 0
|
Senior Member |
|
|
Gary,
You can put anything in there that you want, it it all fits. One or the
other is preferable. The narrow one is OEM. You really don't need either.
On Thu, Jan 6, 2011 at 3:19 PM, Gary Worobec <gtw5@earthlink.net> wrote:
> Mystery solved, the piece that Mondello sent is the pressed steel "snake
> like deal" OEM oil control rail that bolts into the V of the block at the
> very bottom. I have one of those installed so I called and they will trade
> it for the VT-581 Valley tray. Question I forgot to ask is if you use both
> the Valley tray on top of the oil control deal?
>
> Thanks
>
> Gary and Joanne Worobec
> 1973 GMC Glacier
> Anza, CA
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Steve Ferguson
Sierra Vista, AZ
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|