Home » Public Forums » GMCnet » Re: [GMCnet] wannabe question about wheels
| Re: [GMCnet] wannabe question about wheels [message #110252] |
Thu, 30 December 2010 15:39  |
Gary Casey
Messages: 448
Registered: September 2009
Karma: 0
|
Senior Member |
|
|
I have a pair of those wheels on the front of mine. At least they look very
similar - mine are off a Chevy 2500. The bolt pattern is the same, but you will
need new lug nuts. In that time period GM used metric threads and you need
'Merican threads. Lug nuts cost me about $35, but others have found them
cheaper. The wheels have about 2 inches less offset than wheels for dualies, so
they work okay in the front, giving the same offset as adding the spacers that
some sell. But in the rear, even though some have used them, I don't think they
will clear the bodywork very well. The wheels have a larger center so will be
lug centered, which some say is unacceptable. I see no problem, as the tapered
lug nuts will center the wheel adequately - at least in my opinion.
Gary Casey
Looking at buying a GMC and it needs new tires. Still has 16.5in wheels, so I
would like to change over to 16in at the same time. In an effort to make my
money stretch a little further, would these wheels work?
http://bend.craigslist.org/pts/2072980533.html
I'm guessing load and offset may be incompatable.
Pete who really really wants a GMC Brown
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Re: [GMCnet] wannabe question about wheels [message #110279 is a reply to message #110275] |
Thu, 30 December 2010 19:02  |
James Hupy
Messages: 6806
Registered: May 2010
Karma: -62
|
Senior Member |
|
|
Billy, I did a search under the words" helpful GMC stuff" and it pulled it
up. I will check again for Capitals & such.
Jim Hupy
Salem, Or
78 Royale 403
On Thu, Dec 30, 2010 at 4:23 PM, Billy Massey <bdub.bdub@gmail.com> wrote:
> The site can only find what has been entered.
>
> Jim, what is your user name? It is not "Jim Hupy".
>
>
> On Thu, Dec 30, 2010 at 5:00 PM, Dan Gregg <gregg_dan@hotmail.com> wrote:
> >
> >
> > Jim, the Photo Site can not find any albums under Jim Hupy. Not a
> surprise. It often has trouble finding photos through the search feature.
> > dan
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] wannabe question about wheels [message #110284 is a reply to message #110279] |
Thu, 30 December 2010 19:19 |
James Hupy
Messages: 6806
Registered: May 2010
Karma: -62
|
Senior Member |
|
|
Just did it again under my search name "Jim Hupy" and it came right up.
Jim Hupy
Salem, Or
78 Royale 403
On Thu, Dec 30, 2010 at 5:02 PM, James Hupy <jamesh1296@gmail.com> wrote:
> Billy, I did a search under the words" helpful GMC stuff" and it pulled it
> up. I will check again for Capitals & such.
> Jim Hupy
> Salem, Or
> 78 Royale 403
>
> On Thu, Dec 30, 2010 at 4:23 PM, Billy Massey <bdub.bdub@gmail.com>wrote:
>
>> The site can only find what has been entered.
>>
>> Jim, what is your user name? It is not "Jim Hupy".
>>
>>
>> On Thu, Dec 30, 2010 at 5:00 PM, Dan Gregg <gregg_dan@hotmail.com> wrote:
>> >
>> >
>> > Jim, the Photo Site can not find any albums under Jim Hupy. Not a
>> surprise. It often has trouble finding photos through the search feature.
>> > dan
>> _______________________________________________
>> GMCnet mailing list
>> List Information and Subscription Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|
|
|
|
|
| Re: [GMCnet] wannabe question about wheels [message #110305 is a reply to message #110302] |
Thu, 30 December 2010 21:50 |
James Hupy
Messages: 6806
Registered: May 2010
Karma: -62
|
Senior Member |
|
|
Dan, I went to eat dinner and when I returned, Mike had posted the link.
That wheel pictured is indeed a 1 ton Chev or GMC FRONT radial wheel from
the late 90's. The machined piece in the center of the wheel is a hub
extender that I make so that the wheel is hub centered when you use spacers
to clear the 80 MM brake calipers and some of the OEM ones when the hub is
fitted with new rotors. Those wheels are still around and sell new for
around $75- $90. I bought mine used for $25.00 when I put my B.F. Goodrich
T/A's on. The wheel and tire that I used is the same circumference as the
OEM 16.5's were, so the speedo reads the same. I had them media blasted and
powder coated, but they could just as easily be painted with good urethane
base/clear and it would probably be just as durable. A friend of mine just
bought 7 American Eagle Dually wheels from Les Schwab for $193.56 ea., the
center caps were $25.00 each, and the lug nuts were $255.00. That figures
out to be around $1784.92 for the wheels, caps, and lug nuts. He mounted
Wildcat HT Rib Blackwalls LT225/75R-16 10Ply Rated for another $1124.20.
Comes to $2909.12, by the time you throw in the mounting and balancing, it
kicks the hell out of $3000.00. The steel wheels can be a less expensive
option for some of us. I will admit the aluminum wheels are an attractive
addition to the GMC, but they don't go round and round much differently than
a good set of carefully selected steel wheels. It don't tick you off nearly
so much when you scrape a curb with the steel wheels either. All that aside,
buy what you want and enjoy the coach like you and Teri do. Use the heck out
of it and build a huge scrapbook of memories along the way. Happy New Year
to one and All.
Jim Hupy
Salem, Or
78 Royale 403
On Thu, Dec 30, 2010 at 7:10 PM, Dan Gregg <gregg_dan@hotmail.com> wrote:
>
>
> Thanks Mike, for the link. That is not the same wheel that we were talking
> about though.
> dan
> --
> Dan & Teri Gregg
>
> http://danandteri.blogspot.com/
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] wannabe question about wheels [message #110306 is a reply to message #110305] |
Thu, 30 December 2010 22:13 |
 |
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Jim,
I hate to tell you this but your friend just threw away $525.27!
He obviously did not check Jim K's website where you can buy:
Eagle Wheels - (W1015) Price: $179.95 Each. Complete with nuts and S.S.
center. Seven times $179.95 equals $1259.65
http://www.appliedgmc.com/prod.itml/icOid/622
Regards,
Rob M.
USAussie - Downunder
AUS '75 Avion-The Blue StreakTZE365V100428
USA '75 Avion-Double Trouble TZE365V100426
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of James Hupy
Sent: Friday, December 31, 2010 2:50 PM
To: gmclist@temp.gmcnet.org
Subject: Re: [GMCnet] wannabe question about wheels
Dan, I went to eat dinner and when I returned, Mike had posted the link.
That wheel pictured is indeed a 1 ton Chev or GMC FRONT radial wheel from
the late 90's. The machined piece in the center of the wheel is a hub
extender that I make so that the wheel is hub centered when you use spacers
to clear the 80 MM brake calipers and some of the OEM ones when the hub is
fitted with new rotors. Those wheels are still around and sell new for
around $75- $90. I bought mine used for $25.00 when I put my B.F. Goodrich
T/A's on. The wheel and tire that I used is the same circumference as the
OEM 16.5's were, so the speedo reads the same. I had them media blasted and
powder coated, but they could just as easily be painted with good urethane
base/clear and it would probably be just as durable. A friend of mine just
bought 7 American Eagle Dually wheels from Les Schwab for $193.56 ea., the
center caps were $25.00 each, and the lug nuts were $255.00. That figures
out to be around $1784.92 for the wheels, caps, and lug nuts. He mounted
Wildcat HT Rib Blackwalls LT225/75R-16 10Ply Rated for another $1124.20.
Comes to $2909.12, by the time you throw in the mounting and balancing, it
kicks the hell out of $3000.00. The steel wheels can be a less expensive
option for some of us. I will admit the aluminum wheels are an attractive
addition to the GMC, but they don't go round and round much differently than
a good set of carefully selected steel wheels. It don't tick you off nearly
so much when you scrape a curb with the steel wheels either. All that aside,
buy what you want and enjoy the coach like you and Teri do. Use the heck out
of it and build a huge scrapbook of memories along the way. Happy New Year
to one and All.
Jim Hupy
Salem, Or
78 Royale 403
On Thu, Dec 30, 2010 at 7:10 PM, Dan Gregg <gregg_dan@hotmail.com> wrote:
>
>
> Thanks Mike, for the link. That is not the same wheel that we were talking
> about though.
> dan
> --
> Dan & Teri Gregg
>
> http://danandteri.blogspot.com/
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
|
|
| Re: [GMCnet] wannabe question about wheels [message #110327 is a reply to message #110306] |
Fri, 31 December 2010 01:48 |
James Hupy
Messages: 6806
Registered: May 2010
Karma: -62
|
Senior Member |
|
|
Rob, I said he was a friend with a GMC, I didn't say that he was a "smart
shopper". But I will say this about that. When you buy tires and related
stuff from Les Schwab Tires, when you pull into any of their locations in
the Great Pacific Northwest, the guys literally run out to meet you, and
they will fix flats if you buy from them for free, and when they send a road
service truck to your location, they behave the same way. Great service, not
the cheapest.
When my wife and I had our Flower Shop, they always did our tire work and
funny thing, all those Les Schwab guys shopped in our flower shop. Clean cut
guys, clean uniforms, courteous, girls loved them. Sold them lots of flowers
through the years. Ah, small business Americana at it's finest example.
Actually, I personally shop for most things GMC with Jim K for the same
reason. Hustle, competent, friendly, great service, Jim and Grace are good
people and good friends to GMCers. Nick and the rest of the gang there act
the same way.
Jim Hupy
Salem, Or
78 GMC Royale 403
On Thu, Dec 30, 2010 at 8:13 PM, Rob Mueller <robmueller@iinet.net.au>wrote:
> Jim,
>
> I hate to tell you this but your friend just threw away $525.27!
>
> He obviously did not check Jim K's website where you can buy:
>
> Eagle Wheels - (W1015) Price: $179.95 Each. Complete with nuts and S.S.
> center. Seven times $179.95 equals $1259.65
>
> http://www.appliedgmc.com/prod.itml/icOid/622
>
> Regards,
> Rob M.
> USAussie - Downunder
> AUS '75 Avion-The Blue StreakTZE365V100428
> USA '75 Avion-Double Trouble TZE365V100426
>
> -----Original Message-----
> From: gmclist-bounces@temp.gmcnet.org
> [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of James Hupy
> Sent: Friday, December 31, 2010 2:50 PM
> To: gmclist@temp.gmcnet.org
> Subject: Re: [GMCnet] wannabe question about wheels
>
> Dan, I went to eat dinner and when I returned, Mike had posted the link.
> That wheel pictured is indeed a 1 ton Chev or GMC FRONT radial wheel from
> the late 90's. The machined piece in the center of the wheel is a hub
> extender that I make so that the wheel is hub centered when you use spacers
> to clear the 80 MM brake calipers and some of the OEM ones when the hub is
> fitted with new rotors. Those wheels are still around and sell new for
> around $75- $90. I bought mine used for $25.00 when I put my B.F. Goodrich
> T/A's on. The wheel and tire that I used is the same circumference as the
> OEM 16.5's were, so the speedo reads the same. I had them media blasted and
> powder coated, but they could just as easily be painted with good urethane
> base/clear and it would probably be just as durable. A friend of mine just
> bought 7 American Eagle Dually wheels from Les Schwab for $193.56 ea., the
> center caps were $25.00 each, and the lug nuts were $255.00. That figures
> out to be around $1784.92 for the wheels, caps, and lug nuts. He mounted
> Wildcat HT Rib Blackwalls LT225/75R-16 10Ply Rated for another $1124.20.
> Comes to $2909.12, by the time you throw in the mounting and balancing, it
> kicks the hell out of $3000.00. The steel wheels can be a less expensive
> option for some of us. I will admit the aluminum wheels are an attractive
> addition to the GMC, but they don't go round and round much differently
> than
> a good set of carefully selected steel wheels. It don't tick you off nearly
> so much when you scrape a curb with the steel wheels either. All that
> aside,
> buy what you want and enjoy the coach like you and Teri do. Use the heck
> out
> of it and build a huge scrapbook of memories along the way. Happy New Year
> to one and All.
> Jim Hupy
> Salem, Or
> 78 Royale 403
>
> On Thu, Dec 30, 2010 at 7:10 PM, Dan Gregg <gregg_dan@hotmail.com> wrote:
>
> >
> >
> > Thanks Mike, for the link. That is not the same wheel that we were
> talking
> > about though.
> > dan
> > --
> > Dan & Teri Gregg
> >
> > http://danandteri.blogspot.com/
> >
> >
> >
> >
> > _______________________________________________
> > GMCnet mailing list
> > List Information and Subscription Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] wannabe question about wheels [message #110329 is a reply to message #110327] |
Fri, 31 December 2010 04:50 |
Mr ERFisher
Messages: 7117
Registered: August 2005
Karma: 2
|
Senior Member |
|
|
. But I will say this about that. When you buy tires and related
> stuff from Les Schwab Tires, when you pull into any of their locations in
> the Great Pacific Northwest, the guys literally run out to meet you, and
> they will fix flats if you buy from them for free, and when they send a
> road
> service truck to your location, they behave the same way. Great service,
> not
> the cheapest.
>
free rotation
free balance
they clearly are the best, ( only in the great north-west,) but they are
down to here in Livermore, ca, and my Orgn location of Florence. I will
give them all of my tire work, but--- they just don't have much for the GMC.
Just an excellent company
'gene
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] wannabe question about wheels [message #110333 is a reply to message #110258] |
Fri, 31 December 2010 06:23 |
Steven Ferguson
Messages: 3447
Registered: May 2006
Karma: 0
|
Senior Member |
|
|
Jim,
Those look like they're off of a 3500, not 2500.
On Thu, Dec 30, 2010 at 3:31 PM, James Hupy <jamesh1296@gmail.com> wrote:
> Look on the GMC photo site under Helpful GMC stuff under the name Jim Hupy
> to see the 1 ton wheels on the front of my coach.
> Jim Hupy
> Salem, Or
> 78 GMC Royale 403
>
> On Thu, Dec 30, 2010 at 2:01 PM, Dan Gregg <gregg_dan@hotmail.com> wrote:
>
> >
> >
> > Gary, do you have a picture of those wheels on your coach?
> > Dan
> > --
> > Dan & Teri Gregg
> >
> > http://danandteri.blogspot.com/
> >
> >
> >
> >
> > _______________________________________________
> > GMCnet mailing list
> > List Information and Subscription Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Steve Ferguson
Sierra Vista, AZ
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] wannabe question about wheels [message #110350 is a reply to message #110333] |
Fri, 31 December 2010 09:18 |
James Hupy
Messages: 6806
Registered: May 2010
Karma: -62
|
Senior Member |
|
|
Steve, I think that is what I said, 1 Ton or 3500 Model, not the 3/4 Ton.
Actually I think that they are used on the bigger trucks as well, up to the
point where the larger brakes requires the use of larger diameter wheel
centers. Anyway, they are very abundant out there in the Mens Mall & tire
shops.
Jim Hupy
Salem, Or
78 GMC Royale 403
On Fri, Dec 31, 2010 at 4:23 AM, Steven Ferguson <botiemad11@gmail.com>wrote:
> Jim,
> Those look like they're off of a 3500, not 2500.
>
> On Thu, Dec 30, 2010 at 3:31 PM, James Hupy <jamesh1296@gmail.com> wrote:
>
> > Look on the GMC photo site under Helpful GMC stuff under the name Jim
> Hupy
> > to see the 1 ton wheels on the front of my coach.
> > Jim Hupy
> > Salem, Or
> > 78 GMC Royale 403
> >
> > On Thu, Dec 30, 2010 at 2:01 PM, Dan Gregg <gregg_dan@hotmail.com>
> wrote:
> >
> > >
> > >
> > > Gary, do you have a picture of those wheels on your coach?
> > > Dan
> > > --
> > > Dan & Teri Gregg
> > >
> > > http://danandteri.blogspot.com/
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > GMCnet mailing list
> > > List Information and Subscription Options:
> > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > >
> > _______________________________________________
> > GMCnet mailing list
> > List Information and Subscription Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
>
>
>
> --
> Steve Ferguson
> Sierra Vista, AZ
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] wannabe question about wheels [message #110369 is a reply to message #110350] |
Fri, 31 December 2010 12:03 |
 |
WD0AFQ
Messages: 7111
Registered: November 2004
Location: Dexter, Mo.
Karma: 207
|
Senior Member |
|
|
It is good to know that those will work on the fronts. Thanks for the post on them Jim.
Dan
3 In Stainless Exhaust Headers
One Ton All Discs/Reaction Arm
355 FD/Quad Bag/Alum Radiator Manny Tran/New eng.
Holley EFI/10 Tire Air Monitoring System
Solarized Coach/Upgraded Windows
Satelite TV/On Demand Hot Water/3Way Refer
|
|
|
|
Goto Forum:
Current Time: Tue Nov 19 02:32:05 CST 2024
Total time taken to generate the page: 0.01303 seconds
|
GMCforum
Search
Help
Register
Login
Home
