GMCforum: GMCnet » [GMCnet] furnace

Home » Public Forums » GMCnet » [GMCnet] furnace

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] furnace [message #110182]

Wed, 29 December 2010 21:52

john arbuckle

Messages: 122
Registered: March 2010

Karma:

Senior Member

Hey everyone, hope you all had a great cheiatmas. I have a new sf30f furnace
for our 1976 Palm beach and have mounted it where the old furnace was
mounted and ran all new duct work. Now to wire it there are two wires for
the thermostat functio on the new furnace and two wires on the harness on
the oem motorhome harness. which wire goes to which or does it matter? Any
info would be helpful thank you.
John Arbuckle 1976 Palm beach
Tucson AZ
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]

		[GMCnet] furnace By: john arbuckle on Wed, 29 December 2010 21:52
		Re: [GMCnet] furnace By: Craig Lechowicz on Wed, 29 December 2010 21:58
		Re: [GMCnet] furnace By: emerystora on Wed, 29 December 2010 21:58
		Re: [GMCnet] furnace By: WD0AFQ on Wed, 29 December 2010 22:02
		Re: [GMCnet] furnace By: Dan Borlase on Thu, 30 December 2010 00:54
		Re: [GMCnet] furnace By: Tim Conway on Thu, 30 December 2010 09:38
		Re: [GMCnet] furnace By: WD0AFQ on Thu, 30 December 2010 11:00
		Re: [GMCnet] furnace By: midlf on Wed, 29 December 2010 22:29
		Re: [GMCnet] furnace By: fred v on Thu, 30 December 2010 07:21

Previous Topic:	[GMCnet] RUE TRACK ON REACTION ARM SYSTEM
Next Topic:	Water Freezing

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Nov 20 07:17:33 CST 2024

Total time taken to generate the page: 0.01153 seconds