GMCforum: GMCnet » wire mold cover removal

Home » Public Forums » GMCnet » wire mold cover removal

Show: Today's Messages :: Polls :: Message Navigator

wire mold cover removal [message #108130]

Fri, 10 December 2010 15:25

jayrabe

Messages: 509
Registered: June 2009
Location: Portland, OR

Karma:

Senior Member

OK, I know there must be a trick to this...

Moving slowly into the process of pulling my rear ceiling cap to reinsulate and paint over the yellow and find out where the water is leaking in.

Needed to pull the wire mold covers off, and could not get them off without breaking them. Used a putty knife to pry and almost got one off, but almost doesn't count in this case...
http://www.gmcmhphotos.com/photos/showphoto.php?photo=37165&title=wire-mold-coverbrok&cat=5410

And now that it's broken, can I order replacements from someone?

Thanks,

J
76 PB
Portland, OR

Report message to a moderator

[Message index]

		wire mold cover removal By: jayrabe on Fri, 10 December 2010 15:25
		Re: wire mold cover removal By: RF_Burns on Fri, 10 December 2010 15:47
		Re: wire mold cover removal By: cbwoodsr on Fri, 10 December 2010 15:50
		Re: [GMCnet] wire mold cover removal By: Mr ERFisher on Fri, 10 December 2010 15:56
		Re: [GMCnet] wire mold cover removal By: Mr ERFisher on Fri, 10 December 2010 16:13
		Re: [GMCnet] wire mold cover removal By: Mr ERFisher on Fri, 10 December 2010 16:15
		Re: [GMCnet] wire mold cover removal By: Mr ERFisher on Fri, 10 December 2010 17:37
		Re: wire mold cover removal By: GeorgeRud on Fri, 10 December 2010 17:35
		Re: [GMCnet] wire mold cover removal By: emerystora on Fri, 10 December 2010 19:59
		Re: [GMCnet] wire mold cover removal By: pzerkel on Mon, 13 December 2010 09:54
		Re: [GMCnet] wire mold cover removal By: Mr ERFisher on Mon, 13 December 2010 10:00
		Re: [GMCnet] wire mold cover removal By: Charles on Mon, 13 December 2010 10:03
		Re: [GMCnet] wire mold cover removal By: emerystora on Mon, 13 December 2010 10:13
		Re: [GMCnet] wire mold cover removal By: emerystora on Mon, 13 December 2010 10:15
		Re: [GMCnet] wire mold cover removal By: Charles on Mon, 13 December 2010 10:28
		Re: [GMCnet] wire mold cover removal By: Dave Motorhome on Sat, 12 February 2011 21:46
		Re: wire mold cover removal By: Hardie Johnson on Sat, 12 February 2011 22:28
		Re: wire mold cover removal By: Ken Burton on Sun, 13 February 2011 00:03
		Re: [GMCnet] wire mold cover removal By: jayrabe on Tue, 15 February 2011 16:22
		Re: [GMCnet] wire mold cover removal By: rwbmitiopt@comcast.net on Wed, 16 February 2011 16:06
		Re: wire mold cover removal By: zhagrieb on Sun, 13 February 2011 15:52

Previous Topic:	[GMCnet] SOME GOOD NEWS FROM CHUCK
Next Topic:	[GMCnet] For Sale - 1974 26' Custom

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Nov 15 22:29:10 CST 2024

Total time taken to generate the page: 0.01057 seconds