GMCforum: GMCnet » [GMCnet] torsion bars

Home » Public Forums » GMCnet » [GMCnet] torsion bars

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] torsion bars [message #104883]

Tue, 02 November 2010 20:31

larry erd

Messages: 132
Registered: August 2010

Karma: 0

Senior Member

I have the arms off and I recall something about reinforcing the torsion bar
sockets. whats the best ( recommended way) to do that and also the sway bar
hole.

larry erd
77 kingsley
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] torsion bars [message #104885 is a reply to message #104883]

Tue, 02 November 2010 20:34

jimk

Messages: 6734
Registered: July 2006
Location: Belmont, CA

Karma: 9

Senior Member

Steve Ferguson is the master when it comes to rebuilding them.
He has all the fixtures to do it correctly.

On Tue, Nov 2, 2010 at 6:31 PM, larry erd <1ljerd@gmail.com> wrote:
> I have the arms off and I recall something about reinforcing the torsion bar
> sockets. whats the best ( recommended way) to do that and also the sway bar
> hole.
>
> larry erd
> 77 kingsley
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>

--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502

Report message to a moderator

Re: [GMCnet] torsion bars [message #104904 is a reply to message #104883]

Wed, 03 November 2010 07:22

Steven Ferguson

Messages: 3447
Registered: May 2006

Karma: 0

Senior Member

Larry,
All the do-it-yourself instructions and photos are here:
http://www.gmcws.org/Tech/Getting_Your_GMC_Under_Control.pdf

On Tue, Nov 2, 2010 at 6:31 PM, larry erd <1ljerd@gmail.com> wrote:

> I have the arms off and I recall something about reinforcing the torsion
> bar
> sockets. whats the best ( recommended way) to do that and also the sway bar
> hole.
>
> larry erd
> 77 kingsley
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>

--
Steve Ferguson
Sierra Vista, AZ
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Previous Topic:	[GMCnet] ELECTRIC ACTUATOR FOR PARKING BRAKES
Next Topic:	[GMCnet] Used Howell TBI System & Haltech E6GM for sale

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Oct 10 03:15:48 CDT 2024

Total time taken to generate the page: 0.00926 seconds