|
|
Re: [GMCnet] Cad500 Oil Filler Port [message #104164 is a reply to message #104145] |
Mon, 25 October 2010 15:25 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Nope.
But my welder might be willing to make one special order. I've got the jig
I made mine in to ensure fit. There's a minor change needed to provide a
tiny bit of clearance on the right side.
Ken H.
Americus, GA
'76 X-Birchaven w/Cad500/Howell EFI+ & EBL
www.gmcwipersetc.com
On Mon, Oct 25, 2010 at 2:45 PM, Shan Rose <defconfx@gmail.com> wrote:
>
>
> Ken, are you gonna make a batch of those mounts? It looks like its just the
> ticket for a caddy swap! :)
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
Re: [GMCnet] Cad500 Oil Filler Port [message #104247 is a reply to message #104128] |
Mon, 25 October 2010 23:56 |
Firefly
Messages: 98 Registered: May 2008 Location: Augusta, Maine
Karma: 0
|
Member |
|
|
Ken,
If you were inviting someone to bite for another one for the welder to produce, I'm your daisy - I'll commit to paying to have one built.
I have decided to accumulate the various parts needed for the conversion, so if you have anything else available, please let me know, along with payment information.
If I can ever get the 8.1L conversion, I'll do that one on the stretch and the Caddy on my 26' - whenever that happens.
Regards,
Mark Scoble
worldnet@aol.com
Mark Scoble, Lunenburg, MA - 1973 23' Palm Beach Stretched to 32' and in residence at the GMC Co-Op in Orlando, FL
[Updated on: Tue, 26 October 2010 00:00] Report message to a moderator
|
|
|