GMCforum: GMCnet » replacing sliding windows rubber

Home » Public Forums » GMCnet » replacing sliding windows rubber

Show: Today's Messages :: Polls :: Message Navigator

replacing sliding windows rubber [message #103895]

Sat, 23 October 2010 10:22

Jeroen Mutsaers

Messages: 10
Registered: March 2010
Location: Oisterwijk Netherlands

Karma:

Junior Member

Hi,

still quite new on the forum but living in the netherlands makes easy stuff often difficult.... so here's a question maybe someone can help me with.
I just purchased enought window rubbers (same as the vintagetrailsupply.com) for my sliding windows, so front side and rear. I just can't seem to find an example on how to replace these, can i leave the windows in and remove the old (steel) ones and slide the new ones in and just use some adhesive to make them stick....?
or is it easy to take the sliding windows out..

(sorry if my english is not to easy to read but i'm dutch Smile

)

thanks,

jeroen

living on the edge is dangerous but the view is beautiful #1973 palm beach (semi restored) #1968 dodge charger #1972 buick le sabre #1969 plymouth road runner

Report message to a moderator

[Message index]

		replacing sliding windows rubber By: Jeroen Mutsaers on Sat, 23 October 2010 10:22
		Re: replacing sliding windows rubber By: cjonesgo on Sat, 23 October 2010 10:44
		Re: replacing sliding windows rubber By: mike miller on Sat, 23 October 2010 10:58
		Re: replacing sliding windows rubber By: Jeroen Mutsaers on Sat, 23 October 2010 11:19
		Re: replacing sliding windows rubber By: Jeroen Mutsaers on Sat, 23 October 2010 11:21
		Re: replacing sliding windows rubber By: mike miller on Sat, 23 October 2010 19:18
		Re: replacing sliding windows rubber By: Jeroen Mutsaers on Sun, 24 October 2010 02:32
		Re: replacing sliding windows rubber By: Hardie Johnson on Sun, 24 October 2010 07:57
		Re: replacing sliding windows rubber By: Jeroen Mutsaers on Mon, 25 October 2010 02:20
		Re: [GMCnet] replacing sliding windows rubber By: ljdavick on Mon, 25 October 2010 02:36
		Re: replacing sliding windows rubber By: Matt Colie on Mon, 25 October 2010 08:52
		Re: [GMCnet] replacing sliding windows rubber By: Ken Henderson on Mon, 25 October 2010 09:50
		Re: [GMCnet] replacing sliding windows rubber By: Matt Colie on Mon, 25 October 2010 10:22

Previous Topic:	Torsion Bar tool
Next Topic:	[GMCnet] Temperature Gauge Calibration

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Oct 01 17:35:45 CDT 2024

Total time taken to generate the page: 0.00901 seconds