16" Steel Wheels [message #103886] |
Sat, 23 October 2010 09:13 |
Bill Backouris
Messages: 39 Registered: July 2005
Karma: 0
|
Member |
|
|
I realize most folks run Alcoa's or Eagles, but I ran accross a 16" steel wheel from Southwest Wheel (#FO29587)rated at 2540 lbs at 80psi they are $91.00 each, just wondering if anyone is using this wheel.
Thanks
Bill Backouris
77 Birchavne 455
Garden Grove Ca
|
|
|
Re: [GMCnet] 16" Steel Wheels [message #103889 is a reply to message #103886] |
Sat, 23 October 2010 09:46 |
|
USAussie
Messages: 15912 Registered: July 2007 Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Bill,
The problem with steel wheels is that the only ones that will fit our front
disks have a "domed" center section. If these wheels have them you're good
to go, if not . . . .
Here's some pictures of the correct steel wheels:
http://www.gmcmhphotos.com/photos/showphoto.php?photo=33288
http://www.gmcmhphotos.com/photos/showphoto.php?photo=33287
http://www.gmcmhphotos.com/photos/showphoto.php?photo=33286
Regards,
Rob M.
USAussie
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Bill Backouris
Sent: Saturday, October 23, 2010 9:13 AM
To: gmclist@temp.gmcnet.org
Subject: [GMCnet] 16" Steel Wheels
I realize most folks run Alcoa's or Eagles, but I ran accross a 16" steel
wheel from Southwest Wheel (#FO29587)rated at 2540 lbs at 80psi they are
$91.00 each, just wondering if anyone is using this wheel.
Thanks
Bill Backouris
77 Birchavne 455
Garden Grove Ca
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
Re: 16" Steel Wheels [message #103896 is a reply to message #103894] |
Sat, 23 October 2010 10:38 |
|
mike miller
Messages: 3576 Registered: February 2004 Location: Hillsboro, Oregon
Karma: 0
|
Senior Member |
|
|
Bill Backouris wrote on Sat, 23 October 2010 08:20 | Thanks Rob, but might be a dead issue now, re-checked the we-site and in one week prices increased to $135.00 so for a few extra bucks can get a set of Eagles
|
I have been watching Craigslist and picked up 6 used steel wheels for $25 each. I haven't checked them for "trueness" and "roundness" but they "look" OK.
Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo'
http://m000035.blogspot.com
|
|
|
Re: [GMCnet] 16" Steel Wheels [message #103899 is a reply to message #103894] |
Sat, 23 October 2010 10:39 |
|
USAussie
Messages: 15912 Registered: July 2007 Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Bill,
Frankly IMHO that's a wise decision.
Regards,
Rob
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Bill Backouris
Sent: Saturday, October 23, 2010 10:21 AM
To: gmclist@temp.gmcnet.org
Subject: Re: [GMCnet] 16" Steel Wheels
Thanks Rob, but might be a dead issue now, re-checked the we-site and in one
week prices increased to $135.00 so for a few extra bucks can get a set of
Eagles
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
Re: 16" Steel Wheels [message #103920 is a reply to message #103886] |
Sat, 23 October 2010 15:10 |
|
jaholland
Messages: 565 Registered: June 2010 Location: Sweet Home Alebamy
Karma: 0
|
Senior Member |
|
|
Bill Backouris wrote on Sat, 23 October 2010 09:13 | I realize most folks run Alcoa's or Eagles, but I ran accross a 16" steel wheel
from Southwest Wheel (#FO29587)rated at 2540 lbs at 80psi they are $91.00 each, j
ust wondering if anyone is using this wheel.
Thanks
Bill Backouris
77 Birchavne 455
Garden Grove Ca
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Bill;
Why spend $ 91.00 for a Steel Wheel + S&H ~
when you can get the Eagle # 0589 / short cap /8 lugnuts for $ 150.00 Delivered ~
Just get them 2 at a time ~
Put the first 2 on the front ~ when you purchase the next 2, then put all 4 on the rears `
Put the next 2 that you purchase on the front ~
~ Joe ~
/_]*[__][] *[__|] ~ * '73 TZE063V101887 " "
O----------OO--]* ~ '78 TZE168V100234 " "
" Joe & Lavelle " " "
'sweet home alebamy'
[Updated on: Sat, 23 October 2010 18:32] Report message to a moderator
|
|
|
|
Re: [GMCnet] 16" Steel Wheels [message #103938 is a reply to message #103928] |
Sat, 23 October 2010 18:44 |
|
jaholland
Messages: 565 Registered: June 2010 Location: Sweet Home Alebamy
Karma: 0
|
Senior Member |
|
|
k2gkk wrote on Sat, 23 October 2010 17:10 |
$531 difference, for one thing!
* * * * * * * * * * * *
* D C "Mac" Macdonald *
* Amateur Radio K2GKK *
* USAF & FAA, Retired *
** Oklahoma City, OK **
* * * "Money Pit" * * *
* * ex-Palm Beach, 76 *
* * * * * * * * * * * *
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
$ 531.00 ?
$ 91.00 Steel Wheel + $ 25.00 S & H = $ 116.00 +/-
$ 150 Eagle Alloy Wheel # 0569 / Short Cap / 8 Lugnuts = $ 150.00
Thats $ 35.00 / $ 40.00 more oer wheel
30 X 7 = $ 210.00
40 X 7 = $ 280.00
Spend about $300.00 more at most ~ and still have decent Alloys
~ Joe ~
/_]*[__][] *[__|] ~ * '73 TZE063V101887 " "
O----------OO--]* ~ '78 TZE168V100234 " "
" Joe & Lavelle " " "
'sweet home alebamy'
[Updated on: Sat, 23 October 2010 18:48] Report message to a moderator
|
|
|
|
|
Re: [GMCnet] 16" Steel Wheels [message #103967 is a reply to message #103965] |
Sun, 24 October 2010 07:18 |
Bill Backouris
Messages: 39 Registered: July 2005
Karma: 0
|
Member |
|
|
Really trying to watch the budget, but don't want to be penny wise and dollar foolish. I have searched for a listing of wheels that would fit our GMC,this way I can keep an eye out on E-Bay or Craigslist is there such an animal that would be helpful, thanks for all your input
Bill
|
|
|