[GMCnet] front end seems high [message #103201] |
Sat, 16 October 2010 20:49 |
Ray and Verna Lucas
Messages: 25 Registered: February 2006
Karma: 0
|
Junior Member |
|
|
Hi Guys
We are trying to figure out if our 76 Edgemont is supposed to be higher in
the front than the back? We just cannot seem to
get the back any higher.
Let me know if I need to measure like from the top of the tire to the edge
of the wheel well all the way around. Also the drivers side will not come
up as high as the passenger side (rear). I installed individual valves
shortly after we got it because the auto air did not work (why do people lie
to you?????)
Thanks
Ray
Pagosa Springs, CO 76 Edgemont
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
Re: [GMCnet] front end seems high [message #103222 is a reply to message #103201] |
Sun, 17 October 2010 06:29 |
Oldngray
Messages: 544 Registered: August 2009 Location: Punta Gorda Florida
Karma: 0
|
Senior Member |
|
|
Our Edgemonte rides tail down also. It certainly rides and looks much nicer this way than level or nose down.
Our ride height is set per the manual.
Richard MacDonald
Punta Gorda, Florida
Sold our TZE April 2015
|
|
|
Re: [GMCnet] front end seems high [message #103224 is a reply to message #103201] |
Sun, 17 October 2010 07:29 |
Dennis S
Messages: 3046 Registered: November 2005
Karma: 2
|
Senior Member |
|
|
Ray,
Did you buy the Edgemonte from Peter? If so he had only owned the coach for a month or so and may not have known all it's systems. You can read all of his posts and questions in the forum archives.
As for the ride height, here is a link to JimB's Coop information section..
http://gmccoop.com/information.htm
Good luck,
Dennis
Ray and Verna Lucas wrote on Sat, 16 October 2010 20:49 | Hi Guys
We are trying to figure out if our 76 Edgemont is supposed to be higher in
the front than the back? We just cannot seem to
get the back any higher.
Let me know if I need to measure like from the top of the tire to the edge
of the wheel well all the way around. Also the drivers side will not come
up as high as the passenger side (rear). I installed individual valves
shortly after we got it because the auto air did not work (why do people lie
to you?????)
Thanks
Ray
Pagosa Springs, CO 76 Edgemont
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
Dennis S
73 Painted Desert 230
Memphis TN Metro
|
|
|