GMCforum: GMCnet » [GMCnet] Cam Timing

Home » Public Forums » GMCnet » [GMCnet] Cam Timing

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Cam Timing [message #102907]

Wed, 13 October 2010 22:24

USAussie

Messages: 15912
Registered: July 2007
Location: Sydney, Australia

Karma:

Senior Member

G'day,

The Edelbrock timing chain set we installed at the Coop was one that allowed
you to advance or retard the timing 4 degrees. I chose to install it at 0
degrees.

I have been wondering if it would be worth while to get in there and advance
it 4 degrees as that would shift the torque/power band down a bit.

Ken Frey told me that when he built the engine he would have put an "RV" cam
in it.

Waddaya think?

Regards,
Rob M.
USAussie

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Regards, Rob M. (USAussie) The Pedantic Mechanic Sydney, Australia '75 Avion - AUS - The Blue Streak TZE365V100428 '75 Avion - USA - Double Trouble TZE365V100426

Report message to a moderator

[Message index]

		[GMCnet] Cam Timing By: USAussie on Wed, 13 October 2010 22:24
		Re: [GMCnet] Cam Timing By: Kosier on Wed, 13 October 2010 22:45
		Re: [GMCnet] Cam Timing By: USAussie on Wed, 13 October 2010 23:00
		Re: [GMCnet] Cam Timing By: Kosier on Thu, 14 October 2010 20:06
		Re: [GMCnet] Cam Timing By: USAussie on Thu, 14 October 2010 20:29
		Re: [GMCnet] Cam Timing By: Matt Colie on Thu, 14 October 2010 08:06
		Re: [GMCnet] Cam Timing By: USAussie on Thu, 14 October 2010 09:32
		Re: [GMCnet] Cam Timing By: Duce Apocalypse on Fri, 15 October 2010 12:16
		Re: [GMCnet] Cam Timing By: USAussie on Fri, 15 October 2010 13:15

Previous Topic:	Ebay Items: 1973 Canyonlands, toro's Macator and an Eldo.
Next Topic:	Wanting to Contact Bryan Hayes

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Nov 08 02:34:54 CST 2024

Total time taken to generate the page: 0.01036 seconds