| |
2521 Search Results Found |
| 1 |
Forum: GMCnet «»
Posted on: Sat, 15 August 2015 11:21 «»
By: rcjordan
Re: What Is It Worth At the Low End?
Low end is zero and you may have to do a lot of work to get rid of it.
|
| 2 |
Forum: GMCnet «»
Posted on: Fri, 14 August 2015 21:29 «»
By: ljdavick
Re: [GMCnet] Removing Radiator - snapped transmission cooling line
…guess how many feet of 3/8” Poly Armour I’d need to replace the lines? I suppose I could just shimmy my bulk under the coach and measure it…
Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, CA
> On Aug 14, 2015, at 3:15 PM, John Wright…
|
| 3 |
Forum: GMCnet «»
Posted on: Fri, 14 August 2015 17:15 «»
By: powerjon
Re: [GMCnet] Removing Radiator - snapped transmission cooling line
…Johnny,
If you're going to replace the trans cooler lines get rid of the 5/16 inch lines and replace them with 3/8 inch lines. You will get a 30 to 40% increased flow to the cooler. I would also recommend an Aux trans oil cooler to provide extra cooling…
|
| 4 |
Forum: GMCnet «»
Posted on: Fri, 14 August 2015 10:43 «»
By: Mr ERFisher
Re: [GMCnet] quick question
…GMCforum/index.php?t=msg&goto=282688&rid=0&srch=spindle+nut#msg_282688
> "I suspect that most spindle failures result from improper tensioning of
> the
> wheel bearings. Yes, the castellated nut plays a part in that, but the …
|
| 5 |
Forum: GMCnet «»
Posted on: Fri, 14 August 2015 10:15 «»
By: Bullitthead
Re: quick question
…GMCforum/index.php?t=msg&goto=282688&rid=0&srch=spindle+nut#msg_282688
"I suspect that most spindle failures result from improper tensioning of the
wheel bearings. Yes, the castellated nut plays a part in that, but the GMC
is a bit …
|
| 6 |
Forum: GMCnet «»
Posted on: Tue, 11 August 2015 17:12 «»
By: Gary Worobec
Re: [GMCnet] 1991 Geo Tracker For Sale
…Terry, that is a screaming deal. Last year I sold the 91 that I bought from
you in 2009 and bought a Rubicon. I did add a winch and a hardtop but I got
$3500.00 for it. If I did not have the JEEP I'd be all over it.
Good luck.
Thanks,
Gary and Joanne …
|
| 7 |
Forum: GMCnet «»
Posted on: Tue, 11 August 2015 13:32 «»
By: Terry Taylor
[GMCnet] 1991 Geo Tracker For Sale
…is finally time to get rid of my 1991 Tracker. I got a different tow vehicle, so I don't need this.
Located in the San Francisco Bay Area
The good:
About 130,000 miles
Fiberglass hardtop
Newer Geo seats (cloth)
Cold Air Con
After market power windows
…
|
| 8 |
Forum: GMCnet «»
Posted on: Tue, 11 August 2015 06:44 «»
By: kerry pinkerton
Re: Oil Test Results- Advice?
…George, as I posted earlier, my copper number were a good deal higher than yours. Here is the link to the album where I did my 403:
http://gmc.mybirdfeeder.net/GMCforum/index.php?t=msg&goto=208987&rid=2555&srch=Kerry%27s#…
|
| 9 |
Forum: GMCnet «»
Posted on: Sun, 09 August 2015 22:14 «»
By: Bob de Kruyff
Re: poor compression and 92 octane gas
…
I suppose this will be unpopular but it is my understanding that high octane does pretty much nothing for an engine that does not need high octane. If the compression ratio is high or there is a turbo or mechanical boost that in essence raises …
|
| 10 |
Forum: GMCnet «»
Posted on: Sun, 09 August 2015 13:53 «»
By: George Beckman
Re: poor compression and 92 octane gas
…
I suppose this will be unpopular but it is my understanding that high octane does pretty much nothing for an engine that does not need high octane. If the compression ratio is high or there is a turbo or mechanical boost that in essence raises …
|
| 11 |
Forum: GMCnet «»
Posted on: Sun, 09 August 2015 10:54 «»
By: Ken Burton
Re: Fan Clutch Vindication
…-4216 - Heavy Duty - quiet
15-4644 - Severe Duty - noisier
It is your choice.
Here is a thread from 3 years ago where a lot of us bought the 15-4208 / 15-4216.
http://gmc.mybirdfeeder.net/GMCforum/index.php?rid=0&t=msg&goto=169759…
|
| 12 |
Forum: GMCnet «»
Posted on: Tue, 04 August 2015 11:50 «»
By: A Hamilto
Re: Alternate Dash AC Airbox ?
The surefire way to get the picture to everybody is explained here
http://gmc.mybirdfeeder.net/GMCforum/index.php?t=msg&th=31075&start=0&rid=2083
|
| 13 |
Forum: GMCnet «»
Posted on: Tue, 04 August 2015 11:49 «»
By: Olly Schmidt
Re: [GMCnet] Foam removal - PITA - Do I do things wrong
…was way easier to remove down to the metal, than to just get rid of a
bit. I'll meditate on the oscillating thingie Jared posted, but will
probably not drive a total of 200mls just to get it
--
Best regards
Peer Oliver Schmidt
the internet company
PGP …
|
| 14 |
Forum: GMCnet «»
Posted on: Sun, 02 August 2015 11:29 «»
By: bpimm
Re: Fuel fill angle works good
It's covered in this thread.
http://gmc.mybirdfeeder.net/GMCforum/index.php?t=msg&goto=282171&rid=3692#msg_282171
|
| 15 |
Forum: GMCnet «»
Posted on: Sat, 01 August 2015 17:00 «»
By: k2gkk
Re: [GMCnet] Switch for norcold eyebrow board
…better cleaning solution would be Caig's DeOxit! Only takes a very small amount. Betcha can find a local ham that has some of it!
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
~~ ~ D C "Mac" Macdonald ~ ~~
~ ~ Amateur Radio - K2GKK ~ ~
~ ~ Since 30 …
|
| 16 |
Forum: GMCnet «»
Posted on: Sat, 01 August 2015 16:55 «»
By: Chr$
Re: Switch for norcold eyebrow board
…may find all it needs is a good cleaning. Desolder it, unbend the tabs and take it apart. Clean it with IPA (alcohol) and put it back together. Works most of the time unless there was a high current short in the past that melted contacts.
You can also …
|
| 17 |
Forum: GMCnet «»
Posted on: Thu, 30 July 2015 08:06 «»
By: lqqkatjon
Re: Fridge options help
http://gmc.mybirdfeeder.net/GMCforum/index.php?t=msg&th=34761&start=0&rid=1981
|
| 18 |
Forum: GMCnet «»
Posted on: Sun, 26 July 2015 07:28 «»
By: Dennis S
Re: [GMCnet] Use Of The Roof
…
Link to an old thread -- a very nice roof deck -- but the you tube doesn't seem to be active.
The builders email is in the thread -- Larry Stickler -- maybe you could contact him direct.
Dennis
http://gmc.mybirdfeeder.net/GMCforum/index.php?t=msg&…
|
| 19 |
Forum: GMCnet «»
Posted on: Mon, 20 July 2015 11:50 «»
By: Justin Brady
Re: Facebook?
…I'm a new guys so my input probably doesn't count for much but I'll toss my 2 cents in here anyway.
I'd bet the reason for the move to facebook is because mailing lists are 10 years outdated.
I'm a member of quite a few forums and this is the only …
|
| 20 |
Forum: GMCnet «»
Posted on: Sun, 19 July 2015 21:38 «»
By: A Hamilto
Re: [GMCnet] Disc brake project still in failure mode
http://gmc.mybirdfeeder.net/GMCforum/index.php?t=msg&goto=282395&rid=2083&srch=pv4#msg_282395
|
GMCforum
Search
Help
Register
Login
Home