|
2521 Search Results Found |
1 |
Forum: GMCnet «»
Posted on: Wed, 02 March 2011 09:31 «»
By: James Hupy
Re: [GMCnet] Good Sam
…I recall in talking to the people at the toll free number, they contact
the repair facility and see if the facility meets with your criteria for an
acceptable repair facility. I know that they gave me more than one choice.
My requirements were only for a …
|
2 |
Forum: GMCnet «»
Posted on: Mon, 28 February 2011 08:37 «»
By: Steven Ferguson
Re: [GMCnet] 16.5" Steel Wheel "Free to Good Home."
…shouldn't be such a hard decision for her Emery :>)
On Sun, Feb 27, 2011 at 5:49 PM, Emery Stora <emerystora@mac.com> wrote:
>
> On Feb 27, 2011, at 5:37 PM, Desmond wrote:
>
> > When I converted the spare to an ALCOA it …
|
3 |
Forum: GMCnet «»
Posted on: Sun, 27 February 2011 20:53 «»
By: PHILLIP CONNER
Re: [GMCnet] 16.5" Steel Wheel "Free to Good Home."
…Sun, Feb 27, 2011 at 6:49 PM, Emery Stora <emerystora@mac.com> wrote:
>
> On Feb 27, 2011, at 5:37 PM, Desmond wrote:
>
> > When I converted the spare to an ALCOA it surplused the steel 16.5" wheel
> (and old tire)
> &…
|
4 |
Forum: GMCnet «»
Posted on: Sun, 27 February 2011 18:49 «»
By: emerystora
Re: [GMCnet] 16.5" Steel Wheel "Free to Good Home."
…
On Feb 27, 2011, at 5:37 PM, Desmond wrote:
> When I converted the spare to an ALCOA it surplused the steel 16.5" wheel (and old tire)
>
> I'm on Treasure Island, near San Francisco. Does anyone want it?
>
> Desmond
I still have …
|
5 |
Forum: GMCnet «»
Posted on: Sun, 27 February 2011 07:22 «»
By: JShot
Re: [GMCnet] Intake Manifold Question
…
Rob,
I had Dick P. rebuild the carb, and as long as I was putzing around with the top of the engine, I had him send the manifold gaskets and block-off plates kit. Also, it made sense to get rid of the excess wires, rotting vacuum hoses, extra heater…
|
6 |
Forum: GMCnet «»
Posted on: Sat, 26 February 2011 15:20 «»
By: Larry
Re: [GMCnet] Hal Kading, are you out there?
Marcel,
Call me on my Cell
715-529-1983
|
7 |
Forum: GMCnet «»
Posted on: Sat, 26 February 2011 10:12 «»
By: Carl S.
Re: Thanks
Great! Not that we want to get rid of you, but I'm sure you want to get that thing back on the road.
|
8 |
Forum: GMCnet «»
Posted on: Fri, 25 February 2011 19:07 «»
By: SergeL
Re: [GMCnet] Hal Kading, are you out there?
…is Serge in Deming, Nm
Yes there is a harbor freight in Las Cruses was there just yesterday.
-------Original Message-------
From: Charles Boyd
Date: 2/25/2011 5:55:06 PM
To: gmclist@temp.gmcnet.org
Subject: Re: [GMCnet] Hal Kading, are …
|
9 |
Forum: GMCnet «»
Posted on: Fri, 25 February 2011 19:00 «»
By: C Boyd
Re: Hal Kading, are you out there?
…
Larry: I`m not quite in the area, but I sure would like to have a tracker. You could drop it off on your way to Bean Station, or maybe find somebody coming this way??? What year is it??
If you could get it to Texas, maybe Rob would …
|
10 |
Forum: GMCnet «»
Posted on: Fri, 25 February 2011 18:59 «»
By: mjbourgon
Re: [GMCnet] Hal Kading, are you out there?
…there are two of us in El Paso. If you want to park the tracker you can
leave it in front of my building in Sunland Park New Mexico.
We have a harbor freight on the east side of El Paso.
Let me know if we can help out
Marcel and Gary in El Paso
----- …
|
11 |
Forum: GMCnet «»
Posted on: Fri, 25 February 2011 18:56 «»
By: C Boyd
Re: Hal Kading, are you out there?
Larry: I`m not quite in the area, but I sure would like to have a tracker. You could drop it off on your way to Bean Station, or maybe find somebody coming this way??? What year is it??
|
12 |
Forum: GMCnet «»
Posted on: Fri, 25 February 2011 14:41 «»
By: Carl S.
Re: Hal Kading, are you out there?
Larry,
Who needs an engine when you're towing it?
|
13 |
Forum: GMCnet «»
Posted on: Fri, 25 February 2011 14:16 «»
By: USAussie
Re: [GMCnet] Hal Kading, are you out there?
…Larry,
According to the Harbor Freight Store Locator there are three stores within
a 200 mile radius of Arrey, NM:
HARBOR FREIGHT #236 (48.3 mi)
150 W. PICACHO AVE
LAS CRUCES, NM 88005
Phone: 575-541-0676
Store hours:
MON-SAT 8:00AM-9:00PM
SUN 9:00AM-…
|
14 |
Forum: GMCnet «»
Posted on: Fri, 25 February 2011 13:42 «»
By: Larry
Hal Kading, are you out there?
…Hal,
I'm in Arrey NM, just north of you in the Arrey RV park and need some help. If you are home, please call me at 715-529-1083.
I blew the engine in my Tracker (towd) and need to get rid of it. Also need to know if there is a Harbor Freight store…
|
15 |
Forum: GMCnet «»
Posted on: Fri, 25 February 2011 07:53 «»
By: Byron Songer
Re: [GMCnet] radio heads sorrow
…is really quite disturbing is that these Somali pirates hijacked the
vessel within range of US ships. That takes a lot of guts or absolute
stupidity. Speculation is that the large group of pirates, who boarded the
vessel, began to disagree about the …
|
16 |
Forum: GMCnet «»
Posted on: Fri, 25 February 2011 00:31 «»
By: James Hupy
Re: [GMCnet] radio heads sorrow
…Simple, they were Christians on a Christian mission to deliver bibles to
those in need of one. Has been so since the days of the Romans. Many lost
their lives in that pursuit down through the ages. Takes dedication and
bravery. I am saddened that more is …
|
17 |
Forum: GMCnet «»
Posted on: Wed, 23 February 2011 11:48 «»
By: Ken Henderson
Re: [GMCnet] Packard for Sale
…Nope, not Stevenson. This guy's just got a couple that he inherited. Says
he's been taking a financial management course that teaches "...if you're
not using it, get rid of it...". As a big farmer, packing house owner, and
operator of a …
|
18 |
Forum: GMCnet «»
Posted on: Tue, 22 February 2011 16:27 «»
By: mlincoln
Re: [GMCnet] Air Bags maybe for sale
…I'd like them and I've sent you a direct email.
Mike Lincoln
On Feb 22, 2011, at 4:52 PM, jhb1 wrote:
>
>
> I posted this in the swap meet but some people do not check there so here it is
>
> http://gmc.mybirdfeeder.net/GMCforum/index…
|
19 |
Forum: GMCnet «»
Posted on: Tue, 22 February 2011 15:52 «»
By: jhb1
Air Bags maybe for sale
I posted this in the swap meet but some people do not check there so here it is
http://gmc.mybirdfeeder.net/GMCforum/index.php?t=tree&goto=116115&rid=170#msg_116115
|
20 |
Forum: GMCnet «»
Posted on: Mon, 21 February 2011 15:06 «»
By: JohnL455
Re: [GMCnet] The correct Olds 455 motor ?
…rid of the unknown from the PO is one way to approach it, but no guarantee you won't have a failure. I agree with the others before me here that if it ain't broke, don't fix it. IF the FD has no clunks or whines, if the trans shift fairly firm and not …
|