| |
2521 Search Results Found |
| 1 |
Forum: GMCnet «»
Posted on: Mon, 21 March 2011 00:18 «»
By: cjonesgo
Re: Anyone know the Paint code for 76 Eleganza?
…That's the site I was able to get all the cross reference numbers from. Good to hear that the codes are matches to original paint color.
I'm still hoping to find a color match can, but all the local auto parts stores have gotten rid of most of their …
|
| 2 |
Forum: GMCnet «»
Posted on: Fri, 18 March 2011 12:48 «»
By: Keith V
Re: surface rust on engine parts
Listen to Matt (mcolie)...
|
| 3 |
Forum: GMCnet «»
Posted on: Thu, 17 March 2011 23:17 «»
By: Bob de Kruyff
Re: surface rust on engine parts
…
Well I doubt that we do but having grown up in the 60's, 70's and 80's in GM manufacturing, most people would be shocked with what was acceptable. Frankly, at that time our components such as engines and transmissions were bullet proof. Unless there are…
|
| 4 |
Forum: GMCnet «»
Posted on: Thu, 17 March 2011 19:20 «»
By: hertfordnc
Re: surface rust on engine parts
is that THE answer? Do we really have a consensus?
The issue is getting rid of the particles, right?
|
| 5 |
Forum: GMCnet «»
Posted on: Thu, 17 March 2011 16:53 «»
By: Dwayne
Re: [GMCnet] seats
…you Gary for the referral -
I contacted them and ordered 2 seats - both have both arm rests - in a light
beige leather
And they arrived this morning.
My cost $469.99 - cost of seats and shipping to the west coast of Canada.
Then had to pay Import …
|
| 6 |
Forum: GMCnet «»
Posted on: Thu, 17 March 2011 13:19 «»
By: gmchunter
Re: Run GMC On Water?
Phil, we discussed this a few days ago here:
http://gmc.mybirdfeeder.net/GMCforum/index.php?t=msg&th=16024&start=0&rid=1424
Michael
|
| 7 |
Forum: GMCnet «»
Posted on: Fri, 11 March 2011 19:52 «»
By: rvanwin
Re: [GMCnet] Tracker rear panel clips
…
Gary, Thanks for the information. I will keep that in mind. I have a '94 Sidekick I'm getting ready for towing (replacing the heavy Jeep Wrangler I now pull). I'm looking for Roadmaster base plates if anyone is trying to get rid of some? I'm …
|
| 8 |
Forum: GMCnet «»
Posted on: Fri, 11 March 2011 18:10 «»
By: James Hupy
Re: [GMCnet] 80MM Brake Calipers
…Rob, if we are talking about 16" steel wheels, the answer is yes. If 16.5,
the answer is maybe. If the rotors are worn, he might sneak by without
spacers and hub extenders.
Jim Hupy
Salem, Or
78 GMC Royale 403
On Fri, Mar 11, 2011 at 3:00 PM, Rob …
|
| 9 |
Forum: GMCnet «»
Posted on: Fri, 11 March 2011 17:00 «»
By: USAussie
Re: [GMCnet] 80MM Brake Calipers
…Jim,
If Mark is running steel wheels will he need to check and see if the 80mm
caliper bodies will clear the wheels after he grinds the lug off?
Regards,
Rob M.
USAussie - Downunder
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double …
|
| 10 |
Forum: GMCnet «»
Posted on: Fri, 11 March 2011 11:46 «»
By: James Hupy
Re: [GMCnet] 80MM Brake Calipers
…a reminder that there is a lug on the 80MM calipers that must be ground
away before installation to insure clearance between the caliper and the
back side of the wheel. Grind carefully, wear safety glasses, and git rid of
all the grinding residue before …
|
| 11 |
Forum: GMCnet «»
Posted on: Wed, 09 March 2011 11:51 «»
By: fred v
Re: [GMCnet] OIL CONSUMPTION
…
No, I said I've done everything; valve seals, stick calibration, PCV valve, different valve covers, fuel mixture.
I once had an airplane that did that. 4 hours of run time, which equals about 500 miles, and it needed filing up of fuel and 1 quart of…
|
| 12 |
Forum: GMCnet «»
Posted on: Wed, 09 March 2011 07:36 «»
By: Ken Burton
Re: [GMCnet] OIL CONSUMPTION
…
No, I said I've done everything; valve seals, stick calibration, PCV valve, different valve covers, fuel mixture.
I once had an airplane that did that. 4 hours of run time, which equals about 500 miles, and it needed filing up of fuel and 1 quart of…
|
| 13 |
Forum: GMCnet «»
Posted on: Tue, 08 March 2011 00:38 «»
By: Ken Burton
Re: Radiator Rebuild
…thing that bothers me about getting rid of the core is if someone takes only the ends in for a re-core the radiator shop might not know the correct core to place them on.
A re-core might be a little cheaper but in my case I bought a new aluminum one …
|
| 14 |
Forum: GMCnet «»
Posted on: Tue, 08 March 2011 00:37 «»
By: bukzin
Re: [GMCnet] Great sales brochure for solar installs and LED lighting
…[quote title=Mr ERFisher wrote on Mon, 07 March 2011 20:02]dan did not mention his cat heater.
I think this is what makes it all work. the other things like
light, water, etc are icing on the cake, but getting rid of the load of the
furnace, is what…
|
| 15 |
Forum: GMCnet «»
Posted on: Wed, 02 March 2011 21:05 «»
By: James Hupy
Re: [GMCnet] Brake fluid
…Rob, I have bled lots of brakes in my life. The GMC MC is a standard GM
part. The rubber diaphram/gasket that is under the cover that is held down
with wire bails is one piece and as the brake fluid resevoir level goes down
with brake pad and shoe wear, …
|
| 16 |
Forum: GMCnet «»
Posted on: Wed, 02 March 2011 18:10 «»
By: Bob de Kruyff
Re: [GMCnet] Up and Running
What, you glad to get rid of them? Big grin.
Nah! Hated to see them go!
Looks like Dan made it--will be interesting to hear from him.
|
| 17 |
Forum: GMCnet «»
Posted on: Wed, 02 March 2011 17:44 «»
By: JohnL455
Re: Brake fluid
…the seal is quite poor in almost all cases and the cover needs to be vented above the seal for the diaphragm to work. The thing is is that DOT3 is still relativily so cheap compared to gas and oil and bottled water now that it's crazy not to change it. …
|
| 18 |
Forum: GMCnet «»
Posted on: Wed, 02 March 2011 16:46 «»
By: Bob de Kruyff
Re: Best Penetrating Fluid?
…
A lot of folks swear by Kroil, but there was an "independent" article posted that indicated a 50/50 mix of trans fluid and acetone was the best.
Here's a previous thread with some data:
http://gmc.mybirdfeeder.net/GMCforum/index.php?…
|
| 19 |
Forum: GMCnet «»
Posted on: Wed, 02 March 2011 13:22 «»
By: Carl S.
Re: [GMCnet] Up and Running
What, you glad to get rid of them? Big grin.
Nah! Hated to see them go!
|
| 20 |
Forum: GMCnet «»
Posted on: Wed, 02 March 2011 13:13 «»
By: idrob
Re: [GMCnet] Up and Running
What, you glad to get rid of them? Big grin.
|
GMCforum
Search
Help
Register
Login
Home