GMCforum: GMCnet » OEM Fan Shroud

Home » Public Forums » GMCnet » OEM Fan Shroud - 1976

Show: Today's Messages :: Polls :: Message Navigator

OEM Fan Shroud - 1976 [message #370456]

Wed, 07 September 2022 15:29

Bill Van Vlack

Messages: 419
Registered: September 2015
Location: Guemes Island, Washington

Karma:

Senior Member

I need to widen the flanges at the top and bottom of the fan shroud and figure that gluing something on as an overlay with a spacer might work. Anyone know what the shroud material is, and what to use for glue? Epoxy perhaps?

Thanks!

Bill Van Vlack '76 Royale; Guemes Island, Washington; Twin bed, full (DS) side bath, Brazilian Redwood counter and settee tops,455, 6KW generator; new owner a/o mid November 2015.

Report message to a moderator

[Message index]

		OEM Fan Shroud - 1976 By: Bill Van Vlack on Wed, 07 September 2022 15:29
		Re: OEM Fan Shroud - 1976 By: Carl S. on Wed, 07 September 2022 17:21
		Re: OEM Fan Shroud - 1976 By: Bill Van Vlack on Wed, 07 September 2022 20:15
		Re: OEM Fan Shroud - 1976 By: rjw on Thu, 08 September 2022 09:10
		Re: OEM Fan Shroud - 1976 By: Bill Van Vlack on Thu, 08 September 2022 11:25
		Re: OEM Fan Shroud - 1976 By: SteveW on Fri, 09 September 2022 14:13
		Re: OEM Fan Shroud - 1976 By: Bill Van Vlack on Sat, 10 September 2022 00:54

Previous Topic:	Help!!!: Bad Rear Suspension Mounting Bracket
Next Topic:	Alternator bearing failure .!

Goto Forum:

-=] Back to Top [=-

Current Time: Sat May 18 02:41:11 CDT 2024

Total time taken to generate the page: 0.00781 seconds