GMCforum: GMCnet » Ragusa Final Drive Sender

Home » Public Forums » GMCnet » Ragusa Final Drive Sender

Show: Today's Messages :: Polls :: Message Navigator

Ragusa Final Drive Sender [message #369668]

Sun, 15 May 2022 22:37

Tom Katzenberger

Messages: 399
Registered: June 2019
Location: Kingsville, MD

Karma:

Senior Member

Does anyone know the tread size for the regusa final drive temperature sender? Quarter inch or 3/8?

I bent mine with the woodblock supports when I jacked the motor home up. I am not looking forward to putting my finger over the hole to determine what thread size the sender was. I would rather buy the sender and do a quick switch out.

Thanks in advance for any help in this matter.

Take care all,
Tom K.

Tom & Oki Katzenberger, Kingsville, Maryland, 1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition

Report message to a moderator

[Message index]

		Ragusa Final Drive Sender By: Tom Katzenberger on Sun, 15 May 2022 22:37
		Re: Ragusa Final Drive Sender By: Scott Nutter on Mon, 16 May 2022 09:58
		Re: Ragusa Final Drive Sender By: Tom Katzenberger on Mon, 16 May 2022 14:32
		Re: Ragusa Final Drive Sender By: jhbridges on Mon, 16 May 2022 14:59
		Re: Ragusa Final Drive Sender By: Tom Katzenberger on Mon, 16 May 2022 16:02
		Re: Ragusa Final Drive Sender By: Tom Katzenberger on Mon, 16 May 2022 16:07

Previous Topic:	Front "Toll sliding windows" felts
Next Topic:	[GMCnet] incompatability

Goto Forum:

-=] Back to Top [=-

Current Time: Mon May 13 19:24:54 CDT 2024

Total time taken to generate the page: 0.00965 seconds