GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » OEM intake manifolds and cracks, symptoms?
Re: [GMCnet] OEM intake manifolds and cracks, symptoms? [message #335678 is a reply to message #335676] Thu, 26 July 2018 18:07 Go to previous messageGo to previous message
Ken Henderson is currently offline  Ken Henderson   United States
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma:
Senior Member
Or, for those who insist on DIY:
http://www.gmcmhphotos.com/photos/g3115-plugging-intake-manifold-exhaust-crossover.html

Ken H.

On Thu, Jul 26, 2018 at 6:35 PM Larry wrote:

> Don't know if anyone has mentioned this yet, but here goes.
>
> Take your manifold to your nearest foundry. Put a block-off plate on one
> or the other crossover ports and have them pour it full of aluminum. See
> this:
>
> http://www.gmcmhphotos.com/photos/g4571-pouring-the-455-crossover.html
>
> It did two things. Blocked the crossover, and even though the manifold did
> not cracks, it would seal manifold cracks. Think I paid $25 or so. Still
> put the SS plates on the ports to keep exhaust gasses from reaching the
> aluminum. Didn't think it would be a problem, but did it anyway as a safety
> measure. JWID
> --
> Larry
> 78 Royale w/500 Caddy
> Menomonie, WI.
>
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org



Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] FMCA Roadside rescue,problem
Next Topic: FMCA Roadside Rescue problem
Goto Forum:
  


Current Time: Sat May 18 13:46:00 CDT 2024

Total time taken to generate the page: 0.01642 seconds