GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » OEM intake manifolds and cracks, symptoms?
Re: OEM intake manifolds and cracks, symptoms? [message #335676 is a reply to message #335480] Thu, 26 July 2018 17:34 Go to previous messageGo to previous message
Larry is currently offline  Larry   United States
Messages: 2875
Registered: January 2004
Location: Menomonie, WI
Karma:
Senior Member
Don't know if anyone has mentioned this yet, but here goes.

Take your manifold to your nearest foundry. Put a block-off plate on one or the other crossover ports and have them pour it full of aluminum. See this:

http://www.gmcmhphotos.com/photos/g4571-pouring-the-455-crossover.html

It did two things. Blocked the crossover, and even though the manifold did not have cracks, it would seal manifold cracks. Think I paid $25 or so. Still put the SS plates on the ports to keep exhaust gasses from reaching the aluminum. Didn't think it would be a problem, but did it anyway as a safety measure. JWID


Larry Smile
78 Royale w/500 Caddy
Menomonie, WI.

[Updated on: Thu, 26 July 2018 17:35]

Report message to a moderator

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] FMCA Roadside rescue,problem
Next Topic: FMCA Roadside Rescue problem
Goto Forum:
  


Current Time: Sun May 19 09:47:36 CDT 2024

Total time taken to generate the page: 0.00470 seconds