GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMC Swap Meet » 2 Seat Bases (square top), 2 OEM Half Shafts, Xantrex Charger, Misc. in Phoenix (Festool MFT1080 portable work table)
2 Seat Bases (square top), 2 OEM Half Shafts, Xantrex Charger, Misc. in Phoenix [message #331105] Thu, 19 April 2018 22:31 Go to previous message
Richard RV   United States
Messages: 631
Registered: July 2012
Location: Full-timer for 12 years, ...
Karma:
Senior Member
I'm closing down my storage unit in Phoenix and have the items below for sale. I'm only in Phoenix for a short while and need this done before the end of April.

- Two square top OEM seat bases that swivel, in good condition. They both have the little storage door on the front face by your feet. The passenger side one had holes cut in the front door and rear face for small muffin fans to cool the Howell fuel injection computer that was located in the seat base. $60/pair and I can't ship them.

The following stuff was replaced when I installed the one ton front end, there was nothing wrong when it was pulled, and the stuff is all serviceable.

- Two OEM, complete, drive half shafts. The CV boots are not torn, but probably should be replaced before going to the trouble of installing the half shafts. They're in a wood crate that the one ton shafts from Manny came in, so I could ship them if necessary. Best Offer. Don't be shy, someonewho contacts me is getting them!

- Xantrex TrueCharge2 40 amp charger, 804-1240. Excellent unit, but I'm going to rewire the coach with a Progressive Dynamics power center with built-in charger. Xantrex's page:
http://www.xantrex.com/power-products/battery-chargers/truecharge-2-2.aspx
A review:
http://www.rvdoctor.com/2011/03/product-spotlight-xantrex-truecharge2.html
The only difference between the latest model TrueCharge2 is "This NEW feature allows two chargers to work together to combine the output current, achieving up to 120A for large battery banks." which isn't a feature that anyone in a GMC needs.
$125 firm plus shipping.
I believe I have the remote panel and battery temperature sensor for the charger as well, but they're buried in storage. Hopefully I'll locate them this weekend.
http://www.xantrex.com/power-products/default/truecharge2-remote.aspx
http://www.xantrex.com/power-products/default/battery-temperature-sensor.aspx

- Front brake calipers. Free to a good home.

Non-GMC stuff
I have a Festool MFT 1080 table that I don't want to bring back East with me. Make an offer!


Richard V.
4OI-4nine7-5755

PS I use the online forum and don't receive the forum email. If the email people don't see the Swap Meet postings, please let me know and I'll post something on the main forum. Thanks.

'77 Birchaven TZE...777; '76 Palm Beach under construction; ‘76 Edgemont waiting its turn

[Updated on: Fri, 20 April 2018 11:20]

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Brake Buddy Vantage Select
Next Topic: Carefree awning used parts needed
Goto Forum:
  


Current Time: Tue May 14 04:20:17 CDT 2024

Total time taken to generate the page: 0.01034 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software