GMCforum: GMCnet » [GMCnet] What's the best place to cut the radiator support at?

Home » Public Forums » GMCnet » [GMCnet] What's the best place to cut the radiator support at?

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] What's the best place to cut the radiator support at? [message #329356]

Wed, 21 February 2018 01:11

BobDunahugh

Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA

Karma:

Senior Member

I'm thinking about 5" from the bottom. I'm putting aluminum angles on the top, and bottom. Then two vertical bolts to hold the lower angles up to the top angle.. 77, and 78 GMC's have a very nice fan shroud. Going to make my 78 shroud into a two piece in a similar way as the radiator support. Bob Dunahugh 78 Royale

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

[Message index]

		[GMCnet] What's the best place to cut the radiator support at? By: BobDunahugh on Wed, 21 February 2018 01:11
		Re: [GMCnet] What's the best place to cut the radiator support at? By: jhbridges on Wed, 21 February 2018 07:55
		Re: [GMCnet] What's the best place to cut the radiator support at? By: Carl S. on Wed, 21 February 2018 12:13
		Re: [GMCnet] What's the best place to cut the radiator support at? By: Carl S. on Wed, 21 February 2018 12:15
		Re: [GMCnet] What's the best place to cut the radiator support at? By: Scott Nutter on Wed, 21 February 2018 12:45
		Re: [GMCnet] What's the best place to cut the radiator support at? By: Mr ERFisher on Wed, 21 February 2018 13:13

Previous Topic:	[GMCnet] Integrated EFI
Next Topic:	Three wheeled work stand warning

Goto Forum:

-=] Back to Top [=-

Current Time: Thu May 02 20:19:16 CDT 2024

Total time taken to generate the page: 0.01255 seconds