GMCforum: GMCnet » [GMCnet] Bearing Puller Atlanta

Home » Public Forums » GMCnet » [GMCnet] Bearing Puller Atlanta

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Bearing Puller Atlanta [message #329359 is a reply to message #329299]

Wed, 21 February 2018 07:51

jhbridges

Messages: 8412
Registered: May 2011
Location: Braselton ga

Karma:

Senior Member

Andy, depending the condition of the hubs after the bearings are out, decide if you might want Dave Lenzi's modified hubs. Lst time you'll need to do anything but grease them.

--johnny

Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell

Report message to a moderator

[Message index]

		[GMCnet] Bearing Puller Atlanta By: George Zhookoff on Mon, 19 February 2018 14:52
		Re: [GMCnet] Bearing Puller Atlanta By: jimk on Mon, 19 February 2018 16:48
		Re: [GMCnet] Bearing Puller Atlanta By: bdub on Mon, 19 February 2018 17:10
		Re: [GMCnet] Bearing Puller Atlanta By: jhbridges on Tue, 20 February 2018 09:37
		Re: [GMCnet] Bearing Puller Atlanta By: George Zhookoff on Tue, 20 February 2018 10:12
		Re: [GMCnet] Bearing Puller Atlanta By: andyg on Tue, 20 February 2018 22:43
		Re: [GMCnet] Bearing Puller Atlanta By: jhbridges on Wed, 21 February 2018 07:51
		Re: [GMCnet] Bearing Puller Atlanta By: andyg on Wed, 21 February 2018 13:24
		Re: [GMCnet] Bearing Puller Atlanta By: jhbridges on Thu, 22 February 2018 09:28
		Re: [GMCnet] Bearing Puller Atlanta By: andyg on Thu, 22 February 2018 10:30
		Re: [GMCnet] Bearing Puller Atlanta By: jhbridges on Thu, 22 February 2018 14:44

Previous Topic:	[GMCnet] Accident in Washington
Next Topic:	Radiator/Tranny

Goto Forum:

-=] Back to Top [=-

Current Time: Wed May 15 02:02:50 CDT 2024

Total time taken to generate the page: 0.00870 seconds