Re: [GMCnet] Removing the radiator in a 78 GMC. [message #329226 is a reply to message #329198] |
Sat, 17 February 2018 08:10 |
jhbridges
Messages: 8412 Registered: May 2011 Location: Braselton ga
Karma:
|
Senior Member |
|
|
I'll add a point to ponder on JimH's technique, learned from working feedlines on tall towers. Run the bolts through the angle with the nuts and washers on top. Now, should one loosen and the nut come off, there will be a hole which you'll see from above when you're checking the oil and coolant. If the bolt points down, you won't see a missing nut from the top when checking. Hopefully, seeing the hole will keep Bad Things from happening. This alignment lets you also check every bolt on a tower from the ground with a telescope.
--johnny
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|