GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Removing the radiator in a 78 GMC.
Re: [GMCnet] Removing the radiator in a 78 GMC. [message #329206 is a reply to message #329203] Fri, 16 February 2018 11:29 Go to previous messageGo to previous message
Larry is currently offline  Larry   United States
Messages: 2875
Registered: January 2004
Location: Menomonie, WI
Karma:
Senior Member
Carl S. wrote on Fri, 16 February 2018 08:55
http://www.gmcmhphotos.com/photos/timing-chain-2fradiator-project-05-2f09/p34552-timing-chain-2fradiator.html

This is a great way to handle the split radiator frame. I did mine that way back in 2004 and have had the radiator out several times. After unbolting, I used a floor jack to lower and raise the radiator. Between the split radiator and the floor jack it made this job relatively easy. You need to remember that this split is out in the weather, exposed to the elements. Do yourselves a favor and use Stainless Steel nuts, bolts and washers here and put a little white lube on the threads when assembling. Steel bolts will rust and resist coming apart. SS will come apart as if you just put it together yesterday. Just something I learned the hard way. Wink



Larry Smile
78 Royale w/500 Caddy
Menomonie, WI.
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Re: [GMCnet] Transmission vacuum modulator leaking?
Next Topic: [GMCnet] I got another speeding ticket. Non GMC
Goto Forum:
  


Current Time: Thu May 16 04:33:00 CDT 2024

Total time taken to generate the page: 0.01648 seconds