GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Removing the radiator in a 78 GMC.
Re: [GMCnet] Removing the radiator in a 78 GMC. [message #329199 is a reply to message #329198] Fri, 16 February 2018 05:25 Go to previous messageGo to previous message
C Boyd is currently offline  C Boyd   United States
Messages: 2629
Registered: April 2006
Karma:
Senior Member
Good morning Bob. I have found that if you do hinges and pins or bolts that you need offset hinges for the pins to clear the frame. It is easier to use a couple of pieces of angle iron as a bed frame and drill a couple holes for bolts before welding in for alignment. If you are installing by yourself a floor jack and longer than needed bolts will get it started then shorter bolts for final install. It can get tricky with pins trying to align by yourself especially with new rubber supports. It does help to loosen the 4 top plate bolts in frame but leave installed.
http://www.gmcmhphotos.com/photos/texas/p57823-welded.html



BobDunahugh wrote on Fri, 16 February 2018 01:22
I pulled the radiator out of our first 78 11 years ago by removing the radiator in it's framework. That was a job. Can the radiator frame be cut with a small air cut off grinder. And not damage the radiator tanks? Then put some pull pin hinges in a the cut for install? Bob Dunahugh
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org



C. Boyd
76 Crestmont
East Tennessee
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Re: [GMCnet] Transmission vacuum modulator leaking?
Next Topic: [GMCnet] I got another speeding ticket. Non GMC
Goto Forum:
  


Current Time: Thu May 16 16:47:09 CDT 2024

Total time taken to generate the page: 0.02159 seconds