GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Stock gauges. How to calibrate. As you just don't really know the real temp, or oil pressure numbers.
Re: [GMCnet] Stock gauges. How to calibrate. As you just don't really know the real temp, or oil pressure numbers. [message #329100 is a reply to message #329095] Tue, 13 February 2018 08:52 Go to previous messageGo to previous message
James Hupy is currently offline  James Hupy   United States
Messages: 6806
Registered: May 2010
Karma:
Senior Member
Johnny, 65 pushes a bunch of air in front of the coach. Something like "
inversely proportional to the square of the speed" or some other axiom.
When I was a teenager, my mother bought me a subscription to Mechanix
Illustrated. There was a monthly contributor called "Uncle Tom" McHale.
(sp) who did automobile tests. Once a year they did the Mobilgas Economy
Run, and he revealed all the secret tricks they used to improve fuel
economy. One was inflating the bias ply tires to 50 psi. Another was to
place a piece of wood under the accelerator. Swapping thermostats,
maximizing ignition timing, coasting with the engine off on downhills,
driving like you had a balloon under the foot feed was one of his
favorites. Anyway, he always drove under 50 bring the tests. Steady speed,
no jack rabbit starts. You get the picture. If you or I am following
someone who drives like that, it is sure to cause road rage. But it does
save gas.
Jim Hupy
Salem, Or

On Feb 13, 2018 5:55 AM, "Johnny Bridges via Gmclist" <
gmclist@list.gmcnet.org> wrote:

> Can't agree, Jim. Road speeds of 60 - 65 per on cruise. The spinning at
> startup if you aren't careful is due I believe to a lack of traction in
> front coupled with a breathed-on engine. To the degree that it wouldn't
> go up a slight grade on a wet gravel county road in MO. I had to fall back
> and get a running start. This with a no slip differential which simply
> means both front wheels spin when there's no traction.
>
> --johnny
> --
> 76 26' Eleganza(?) with beaucoup mods and add - ons.
> Braselton, Ga.
> "I forgive them all, save those who hurt the dogs. They must answer to me
> in hell" - ol Andy, paraphrased
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: GMC "Time Machine"
Next Topic: 403 timing tab
Goto Forum:
  


Current Time: Mon May 06 21:56:22 CDT 2024

Total time taken to generate the page: 0.01702 seconds