GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Stock gauges. How to calibrate. As you just don't really know the real temp, or oil pressure numbers.
Re: [GMCnet] Stock gauges. How to calibrate. As you just don't really know the real temp, or oil pressure numbers. [message #329076 is a reply to message #329074] Mon, 12 February 2018 08:02 Go to previous messageGo to previous message
Kingsley Coach is currently offline  Kingsley Coach   United States
Messages: 2691
Registered: March 2009
Location: Nova Scotia Canada
Karma:
Senior Member
Johnny
You aren't the only one waiting for more info on this. I've been mentally
doing a rebuild for 6 months now..if I could put it off one more year......

Mike in NS


Virus-free.
www.avast.com



On Mon, Feb 12, 2018 at 9:47 AM, Johnny Bridges via Gmclist <
gmclist@list.gmcnet.org> wrote:

> Then 22PSI running is adequate for my coach? I feel much better if that's
> correct. It starts over 40PSI cold idle but drops drastically when it
> comes up to temp. This with 15-45 Rotella. It does, however hold 30 or
> so at a minimum. Tell me that's safe and I'll quit worrying over it.
>
> --johnny
> --
> 76 26' Eleganza(?) with beaucoup mods and add - ons.
> Braselton, Ga.
> "I forgive them all, save those who hurt the dogs. They must answer to me
> in hell" - ol Andy, paraphrased
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>



--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS

Life is too short to hold a grudge; slash some tires and call it even !
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: GMC "Time Machine"
Next Topic: 403 timing tab
Goto Forum:
  


Current Time: Mon May 06 21:17:44 CDT 2024

Total time taken to generate the page: 0.04517 seconds