GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Required air pressure for quad bag rear suspension
Re: Required air pressure for quad bag rear suspension [message #328910 is a reply to message #328867] Wed, 07 February 2018 05:58 Go to previous messageGo to previous message
RF_Burns is currently offline  RF_Burns   Canada
Messages: 2276
Registered: June 2008
Location: S. Ontario, Canada
Karma:
Senior Member
Finding a tilt-on flat bed that can handle s 23ft should not be hard to find. Ours was a 26ft so the bikerack had to come off and wrap the front bumper with HD moving blankets to protect it.

The pot holes on the 401 at this time of the year will be brutal in places, especially through Toronto. Fixing a bent bogie etc ain't that cheap either.

I'd pay extra for the roll-on.

Are you going to Borrmann's?


Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: What Canadian do in the Winter
Next Topic: [GMCnet] When did the horse collar fan shroud end?
Goto Forum:
  


Current Time: Sun May 12 00:19:53 CDT 2024

Total time taken to generate the page: 0.00988 seconds