GMCforum: GMCnet » OFF TOPIC- NOT GMC

Home » Public Forums » GMCnet » OFF TOPIC- NOT GMC - Long read (Did you know it takes 15 days to go from Maryland to Central Florida?)

Show: Today's Messages :: Polls :: Message Navigator

Re: OFF TOPIC- NOT GMC - Long read [message #328704 is a reply to message #328654]

Tue, 30 January 2018 07:42

jhbridges

Messages: 8412
Registered: May 2011
Location: Braselton ga

Karma:

Senior Member

When we fitted indoor gensets - Caterpillar and Cummins - we used flex sections which had flanges on each end. One end bolted to the muffler, one to the pipe, both of which had mating flanges. Worst that could happen - never did - was you'd lose a donut. Is there room to put a flanged system on the coach?
It also points out, if you go RVing, regardless the age and stage and price of your coach, you're gonna have to tinker with it from time to time. I've learned. If a strange noise occurs, even once, stop and figure out what it was.

--johnny

Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell

Report message to a moderator

[Message index]

		OFF TOPIC- NOT GMC - Long read By: kerry pinkerton on Sun, 28 January 2018 06:11
		Re: [GMCnet] OFF TOPIC- NOT GMC By: Ken Henderson on Sun, 28 January 2018 07:14
		Re: [GMCnet] OFF TOPIC- NOT GMC By: James Hupy on Sun, 28 January 2018 10:05
		Re: [GMCnet] OFF TOPIC- NOT GMC By: BobDunahugh on Sun, 28 January 2018 10:00
		Re: [GMCnet] OFF TOPIC- NOT GMC By: kerry pinkerton on Sun, 28 January 2018 20:13
		Re: [GMCnet] OFF TOPIC- NOT GMC By: Ken Henderson on Sun, 28 January 2018 20:58
		Re: OFF TOPIC- NOT GMC - Long read By: RF_Burns on Sun, 28 January 2018 07:48
		Re: OFF TOPIC- NOT GMC - Long read By: skip2 on Sun, 28 January 2018 20:04
		Re: OFF TOPIC- NOT GMC - Long read By: roy1 on Mon, 29 January 2018 19:51
		Re: OFF TOPIC- NOT GMC - Long read By: jhbridges on Tue, 30 January 2018 07:42

Previous Topic:	Engine Removal
Next Topic:	Re: [GMCnet] GMCNet Portional Valve (update)

Goto Forum:

-=] Back to Top [=-

Current Time: Sat May 18 01:36:30 CDT 2024

Total time taken to generate the page: 0.01021 seconds