GMCforum: GMCnet » Re: [GMCnet] GMCNet Proportional Valve

Home » Public Forums » GMCnet » Re: [GMCnet] GMCNet Proportional Valve

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] GMCNet Proportional Valve [message #328523]

Tue, 23 January 2018 00:14

THOMAS R WHITTON

Messages: 47
Registered: September 2016

Karma:

Member

Suggestions on removing the proportional valve.
I have loosened the tubing nuts from the valve but all the nuts are frozen to the tubing. I'm sure I would corkscrew the tubing if I try turning the nuts more than a quarter turn or so. There is no sign of rust on the tubing or the nuts but, of course, I can't see between the parts. How do you free the nuts loose from the tubing? I don't relish the thought of ruining and having to replace the brake lines.
This is a job I've never done and can use suggestions.
Tom Whitton26 foot upgraded GMCPaducah, Ky

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

[Message index]

		Re: [GMCnet] GMCNet Proportional Valve By: THOMAS R WHITTON on Tue, 23 January 2018 00:14
		Re: [GMCnet] GMCNet Proportional Valve By: Ken Burton on Tue, 23 January 2018 06:21
		Re: [GMCnet] GMCNet Proportional Valve By: lqqkatjon on Tue, 23 January 2018 07:50
		Re: [GMCnet] GMCNet Proportional Valve By: Bullitthead on Tue, 23 January 2018 08:45
		Re: [GMCnet] GMCNet Proportional Valve By: Phantom2 on Tue, 23 January 2018 22:06
		Re: [GMCnet] GMCNet Proportional Valve By: Ken Burton on Wed, 24 January 2018 04:32
		Re: [GMCnet] GMCNet Proportional Valve By: Matt Colie on Wed, 24 January 2018 08:47
		Re: [GMCnet] GMCNet Proportional Valve By: Russell K. on Wed, 24 January 2018 13:17
		Re: [GMCnet] GMCNet Proportional Valve By: THOMAS R WHITTON on Thu, 25 January 2018 13:20
		Re: [GMCnet] GMCNet Proportional Valve By: NextGenGMC on Thu, 25 January 2018 15:05
		Re: [GMCnet] GMCNet Proportional Valve By: Ken Burton on Thu, 25 January 2018 18:56
		Re: [GMCnet] GMCNet Proportional Valve By: Ken Henderson on Thu, 25 January 2018 20:55
		Re: [GMCnet] GMCNet Proportional Valve By: Matt Colie on Fri, 26 January 2018 08:21
		Re: [GMCnet] GMCNet Proportional Valve By: hdforge on Fri, 26 January 2018 08:32

Previous Topic:	Head gasket leak?
Next Topic:	[GMCnet] Need an engine oil pan for a 403, or 455

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Apr 29 08:21:43 CDT 2024

Total time taken to generate the page: 0.00870 seconds