Re: [GMCnet] GMCNet Proportional Valve [message #328607 is a reply to message #328602] |
Thu, 25 January 2018 20:55 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma:
|
Senior Member |
|
|
Tom, et al,
While you're at it, if you haven't already, get these:
http://www.irwin.com/tools/locking-tools/the-original-locking-wrenches
At least the 4" & 7" ones.
FAR superior to flare nut wrenches for tight nuts -- they won't spread.
Ken H.
On Thu, Jan 25, 2018 at 7:56 PM, Ken Burton wrote:
> Tom, Get a little butane pencil torch and heat the just the nut. Then
> shock cool it with your penetrating oil and let it soak. The heat and
> uneven
> shock cooling lets the oil penetrate quicker.
>
> TSC has the torches for a couple of dollars and you fill them with butane
> lighter fluid.
>
> Here is an example:
>
> https://www.ebay.com/itm/Set-of-2-Butane-MINI-PENCIL-
> TORCHES-Refillable-Welding-Soldering-Jewerly-Repair/
> 312036072984?epid=1340428883&hash=item48a6cc9e18:g:BDcAAOSw-RFaYSS8
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|