GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Re: [GMCnet] GMCNet Proportional Valve
Re: [GMCnet] GMCNet Proportional Valve [message #328588 is a reply to message #328523] Thu, 25 January 2018 13:20 Go to previous messageGo to previous message
THOMAS R WHITTON is currently offline  THOMAS R WHITTON   United States
Messages: 47
Registered: September 2016
Karma:
Member
Russell, Ken Jim and others...
Thanks everyone for excellent advise.  Here's where I stand on the project... 
This will be the third day to spray the acetone/ATF 50-50 mix on the proportional valve fittings.  So far, I have resisted the urge to get out a wrench, hammer and torch.  I'll try a wrench tomorrow.  By the way, as far as I know, my proportional valve and brake lines are original.  Amazingly, they show zero rust.  I guess that may have something t do with keeping the coach garaged most of its life.  Russell, if you were able to free up your lines I may have a fighting chance.
I'll report whatever happens.
Thanks,
Tom Whitton26 foot updated GMCTom Whitton
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Head gasket leak?
Next Topic: [GMCnet] Need an engine oil pan for a 403, or 455
Goto Forum:
  


Current Time: Thu May 16 06:29:28 CDT 2024

Total time taken to generate the page: 0.00941 seconds