GMCforum: GMCnet » Overbore Size

Home » Public Forums » GMCnet » Overbore Size (Related to my engine failure)

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Overbore Size [message #328549 is a reply to message #328548]

Tue, 23 January 2018 16:23

James Hupy

Messages: 6806
Registered: May 2010

Karma:

Senior Member

Bob, there is always sleeves. (Grin)
Jim Hupy

On Jan 23, 2018 2:19 PM, "Bob Dunahugh" wrote:

> .060 over is somewhat common. The only real down side is that it can't be
> bored again. In a motorhome. You'll never live long enough to have that as
> an issue. Bob Dunahugh
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

[Message index]

		Overbore Size By: Carl S. on Mon, 22 January 2018 14:12
		Re: [GMCnet] Overbore Size By: James Hupy on Mon, 22 January 2018 14:19
		Re: [GMCnet] Overbore Size By: James Hupy on Tue, 23 January 2018 15:58
		Re: [GMCnet] Overbore Size By: BobDunahugh on Tue, 23 January 2018 16:18
		Re: [GMCnet] Overbore Size By: James Hupy on Tue, 23 January 2018 16:23
		Re: [GMCnet] Overbore Size By: James Hupy on Tue, 23 January 2018 18:06
		Re: Overbore Size By: kingd on Tue, 23 January 2018 10:31
		Re: [GMCnet] Overbore Size By: powwerjon on Tue, 23 January 2018 10:52
		Re: [GMCnet] Overbore Size By: jimk on Tue, 23 January 2018 11:18
		Re: Overbore Size By: JohnL455 on Tue, 23 January 2018 17:26
		Re: Overbore Size By: JohnL455 on Tue, 23 January 2018 20:47

Previous Topic:	replacement interior window trim
Next Topic:	[GMCnet] New stuff being made??

Goto Forum:

-=] Back to Top [=-

Current Time: Fri May 10 14:11:29 CDT 2024

Total time taken to generate the page: 0.01393 seconds