GMCforum: GMCnet » Overbore Size

Home » Public Forums » GMCnet » Overbore Size (Related to my engine failure)

Show: Today's Messages :: Polls :: Message Navigator

Re: Overbore Size [message #328538 is a reply to message #328505]

Tue, 23 January 2018 10:31

kingd

Messages: 592
Registered: June 2004

Karma:

Senior Member

On a LOT of engines 0.060" is probably over the RECCOMMENDED maximum.
Ken H. knows some engine people that could probably give a very educated opinion.
0.060" might work on a particular block but not on another of the same type/brand, etc.
Core shift.
Ken H's friend might also be willing to tell us about "core shift"

DAVE KING lurker, wannabe Toronto, Ontario, Canada

Report message to a moderator

[Message index]

		Overbore Size By: Carl S. on Mon, 22 January 2018 14:12
		Re: [GMCnet] Overbore Size By: James Hupy on Mon, 22 January 2018 14:19
		Re: [GMCnet] Overbore Size By: James Hupy on Tue, 23 January 2018 15:58
		Re: [GMCnet] Overbore Size By: BobDunahugh on Tue, 23 January 2018 16:18
		Re: [GMCnet] Overbore Size By: James Hupy on Tue, 23 January 2018 16:23
		Re: [GMCnet] Overbore Size By: James Hupy on Tue, 23 January 2018 18:06
		Re: Overbore Size By: kingd on Tue, 23 January 2018 10:31
		Re: [GMCnet] Overbore Size By: powwerjon on Tue, 23 January 2018 10:52
		Re: [GMCnet] Overbore Size By: jimk on Tue, 23 January 2018 11:18
		Re: Overbore Size By: JohnL455 on Tue, 23 January 2018 17:26
		Re: Overbore Size By: JohnL455 on Tue, 23 January 2018 20:47

Previous Topic:	replacement interior window trim
Next Topic:	[GMCnet] New stuff being made??

Goto Forum:

-=] Back to Top [=-

Current Time: Fri May 10 07:45:53 CDT 2024

Total time taken to generate the page: 0.00954 seconds