Re: [GMCnet] Onan (4K) Priming / Fuel Pump Questions... [message #328484 is a reply to message #328480] |
Mon, 22 January 2018 00:33 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma:
|
Senior Member |
|
|
We have a great primer swith for Onan , go to our site.
On Sun, Jan 21, 2018 at 8:08 PM, Richard H Staples
wrote:
> SteveW wrote:
>
> shouldn't the pump slow down after the carburetor bowl gets filled ?? Is
> seems that mine continues to pump - no changes in the sound it makes...
>
> This is just a SWAG, but it sounds like it might be sucking air. I'd
> double check all the fuel lines back to the tank.
> Other possibilities that come to mind include a defective fuel shut off
> valve or wiring thereto. (If you're still using the cut-off valve.) Or
> possibly leaking check valves (dirt/rust) in the pump. Just some places
> to start....
> HTH
> Rick Staples
> --
> Rick Staples, '75 Eleganza, Johnstown, CO
>
> "Advice is a dangerous gift, even from the Wise to the Wise, and all paths
> may run ill." -Tolkien
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|