GMCforum: GMCnet » Engine Removal

Home » Public Forums » GMCnet » Engine Removal

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Engine Removal [message #328472 is a reply to message #328457]

Sun, 21 January 2018 19:32

Rollerg

Messages: 111
Registered: November 2014
Location: Marysville, MI

Karma:

Senior Member

Carl,
I have an engine gantry assembly, but getting it to you would be an issue.

Gary Coaster / Reno, NV
1977 GMC Eleganza ll
GMC RV Day Night Shade Sales
GMCShades@gmail.com
www.GMCMotorhomemarketplace.com/GMC_Shades/

> On Jan 21, 2018, at 1:41 PM, Thomas Phipps wrote:
>
> Three basic methods; Remove front clip, remove out the top of engine hatch, and drop out the bottom. Is the coach on a good firm surface?
> Do you have a few extra hands? Out the top of hatch requires a trolley to move the assembly. Out the bottom, without a pit requires lifting the front
> of the coach at least 32 inches. I have never done a front clip, but lots of auxiliary things to move out before you can remove front clip assembly.
> A pit really makes it easier, but most of us do not have access to one. A lift will also substitute for a pit.
> If you elect to take it out the top, take your front seats out first. Gives you much more room to maneuver. Put something down to protect your
> interior.
> I did not notice if you have a 23 or 26. 23 engine can come out the large window on the passenger side, using a cherry picker. Removing the window is
> not difficult, just an extra step.
> Good luck, it's just heavy and awkward.
> Tom, who has done two through the top.
> --
> 2012 Phoenix Cruiser model 2552
> KA4CSG
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

[Message index]

		Engine Removal By: Carl S. on Sun, 21 January 2018 14:29
		Re: [GMCnet] Engine Removal By: <tawptool on Sun, 21 January 2018 14:45
		Re: [GMCnet] Engine Removal By: sgltrac on Sun, 21 January 2018 14:53
		Re: [GMCnet] Engine Removal By: tphipps on Sun, 21 January 2018 15:41
		Re: [GMCnet] Engine Removal By: Rollerg on Sun, 21 January 2018 19:32
		Re: [GMCnet] Engine Removal By: sgltrac on Sun, 21 January 2018 20:14
		Re: [GMCnet] Engine Removal By: Ken Burton on Sun, 21 January 2018 20:31
		Re: Engine Removal By: Jim Wagner on Sun, 21 January 2018 16:00
		Re: Engine Removal By: lqqkatjon on Sun, 21 January 2018 16:33
		Re: Engine Removal By: Scott Nutter on Sun, 21 January 2018 17:18
		Re: Engine Removal By: Ken Burton on Sun, 21 January 2018 18:59
		Re: Engine Removal By: Larry on Sun, 21 January 2018 20:42
		Re: [GMCnet] Engine Removal By: Sandra Price on Mon, 22 January 2018 00:06
		Re: Engine Removal By: Carl S. on Mon, 22 January 2018 11:08
		Re: [GMCnet] Engine Removal By: Richard Denney on Mon, 22 January 2018 18:30
		Re: [GMCnet] Engine Removal By: Kosier on Mon, 22 January 2018 19:13
		Re: [GMCnet] Engine Removal By: Ken Henderson on Mon, 22 January 2018 19:39
		Re: [GMCnet] Engine Removal By: Carl S. on Mon, 22 January 2018 19:55
		Re: Engine Removal By: Adrien G. on Mon, 22 January 2018 00:21
		Re: Engine Removal By: Larry on Mon, 22 January 2018 12:40
		Re: [GMCnet] Engine Removal By: James Hupy on Mon, 22 January 2018 12:56
		Re: Engine Removal By: Scott Nutter on Mon, 22 January 2018 10:18
		Re: Engine Removal By: Larry on Mon, 22 January 2018 12:35
		Re: Engine Removal By: jhbridges on Mon, 22 January 2018 15:47
		Re: [GMCnet] Engine Removal By: James Hupy on Mon, 22 January 2018 16:45
		Re: Engine Removal By: dservati1 on Mon, 29 January 2018 23:53
		Re: Engine Removal By: dservati1 on Tue, 30 January 2018 00:22

Previous Topic:	[GMCnet] LP gas line in the right rear wheel well. Has that been a problem?
Next Topic:	OFF TOPIC- NOT GMC - Long read

Goto Forum:

-=] Back to Top [=-

Current Time: Mon May 13 01:44:15 CDT 2024

Total time taken to generate the page: 0.01269 seconds